Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.1 User’s Guide

PDF

Configuring Enhanced Cooling Mode for Fans Using Web Interface

To configure Enhanced Cooling Mode (ECM) for fans using CMC Web interface:
  1. In the system tree, go to Chassis Overview, and then click Fans > Setup . The Advanced Fan Configurations page is displayed.
    • NOTE: If ECM is disabled and all the fans in the chassis do not support ECM, then the Setup tab to access the Advanced Fan Configurations page is not displayed.
  2. In the Fans Configuration section, from the Enhanced Cooling Mode drop-down menu select Enable or Disable. For more information about the field descriptions, see the CMC Online Help.
    • NOTE:
    The Enhanced Cooling Mode option is available for selection only if:
    • All the fans in the chassis support ECM feature. In this case, you can enable or disable the ECM mode.
    • ECM is already enabled and the fan configuration is changed to Mixed Mode or all fans do not support ECM mode. In this case, the ECM mode can be disabled, but cannot be enabled again until all fans in the chassis support ECM.
    • NOTE: The Enhanced Cooling Mode and the Apply options are grayed out if:
      • ECM mode is already disabled and fan configuration consists of unsupported fans along with supported fans. The information section displays a message listing the fans that are incompatible with ECM feature.
      • ECM mode is already disabled and Max Power Conservation Mode (MPCM) is enabled. The information section displays a message that ECM is not supported when MPCM is enabled.

    For more information see the CMC Online Help.

    If the ECM feature is disabled, you cannot enable the feature again until all fans in the chassis support ECM.

  3. Click Apply. An operation successful message is displayed after the ECM option is successfully enabled or disabled. The ECM mode does not get enabled if:
    • The extra power required for supported fans is not available.
    • Any of the fans in the chassis does not support ECM.
    • MPCM is already enabled.
    An alert message with the reason for ECM not getting enabled is displayed .
    • NOTE: If you try to enable MPCM when ECM is enabled, the ECM mode changes to enabled but unsupported state.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\