Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Disable Storage Array Feature

Description

This command disables a storage array feature. Run the show storageArray command to display a list of the feature identifiers for all enabled premium features in the storage array.

Syntax

disable storageArray (featurePack | feature=featureAttributeList)

The featureAttributeList can be one or more of these attribute values. If you enter more than one attribute value, separate the values with a space.

virtualDiskCopy
snapshot
asyncReplication
remoteReplication
mixedPhysicalDiskTypes
goldKey
driveSecurity
enterpriseSecurityKeyMgr
thinProvisioning
storagePartition[2|4|8|16|32|64|96|128|192|256|512|Max]

The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, storagePartition256

physicalDiskSlotLimit[16|24|32|48|60|64|72|96|112|10|128|136|144|180|192|256| 272|300|360|384|448|480|Max]
The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, physicalDiskSlotLimit360
ssdCache
SSDSupport
highPerformanceTier
raid6

NOTE: The following attribute is for enabling the snapshot (legacy) feature only.
- snapshot[2|4|8|16]

The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, snapshot16

NOTE: The remoteReplication attribute is valid only for firmware versions before 7.84. Starting with firmware 7.84 the remoteReplication attribute is replaced by remoteReplication.
- remoteReplication[8|16|32|64|128]

The form for this attribute value is a combination of the alphabetical term merged with the numerical value, for example, remoteReplication128

Parameters

None.

Additional Information

If you specify the remoteReplication parameter, this command disables the Remote Replication premium feature and takes away the structure of the replication repository virtual disk.

If you disable the High Performance Tier feature, all of the included features are disabled.

To use the High Performance Tier premium feature, you must configure a storage array as:

SHIPPED_ENABLED
SHIPPED_ENABLED=FALSE; KEY_ENABLED=TRUE

Bienvenue

Bienvenue dans l’univers Dell