Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Save Storage Array SAS PHY Counts

Description

This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters, run the Reset Storage Array SAS PHY Baseline command. See Reset Storage Array SAS PHY Baseline.

Syntax

save storageArray SASPHYCounts file="
                                 filename"

Parameters

Parameter	Description
`file`	Specifies the file path and the file name to which you save the SAS PHY counters. Enclose the file path and the file name in double quotation marks (" "). For example: file="C:\Program Files\CLI\logs\sasphy.csv" This command does not automatically append a file extension to the saved file. Any file name is acceptable, but the . csv extension must be used.