Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Download Storage Array NVSRAM

Description

This command downloads NVSRAM values for the storage array RAID controller module.

Syntax

download storageArray NVSRAM file="filename" 
                                 [healthCheckMelOverride=(TRUE | FALSE)]

Parameter

Parameter

Description

file

The file path and the file name that contains the NVSRAM values. Enclose the NVSRAM file name in double quotation marks (" "). For example:

file="C:\Program Files\CLI\dnld\afrm.dlp"

Valid file names have a .dlp extension.

healthCheckMelOverride

The setting to override the results of the health check of the major event log (MEL). MEL validation still occurs, it is not bypassed. If the MEL check fails, you can bypass the failure by using this parameter when running the command.

Before any download, the RAID controller module checks the event log to determine if an event has occurred that might prevent the new NVSRAM from successfully downloading. If such an event has occurred, the RAID controller module normally does not download new NVSRAM.

This parameter forces the RAID controller module to download new NVSRAM. The default value is FALSE . Set this value to TRUE if you want to force the RAID controller module to download new NVSRAM.