Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Save Storage Array Events

Description

This command saves events from the Major Event Log (MEL) to a file.

Any or all of the following events can be saved:

Critical events—Errors occurring on the storage array that needs to be addressed immediately. Loss of data access may occur if the error is not immediately corrected.
Warning events—Errors occurring on the storage array resulting in degraded performance or reduced ability to recover from additional errors. Access to data has not been lost, but the must be corrected to prevent possible loss of data access in the event of an additional error.
Informational events—Events occurring on the storage array that do not impact normal operations. This event is reporting a change in configuration or other information useful in evaluating the performance of the storage array.
Debug events—Events occurring on the storage array that provides information useful in determining steps or states that led to the error. This information may be useful to your Technical Support representative in helping determine error causes.

NOTE: Some storage arrays may be unable to support all the above mentioned types of events.

Syntax

save storageArray (allEvents | criticalEvents | warningEvents | infoEvents | debugEvents) file="filename" [count=numberOfEventsforceSave=(TRUE
                                 | FALSE)]

Parameters

Parameter	Description
allEvents	Saves all events to a file.
criticalEvents	Saves only critical events to a file.
warningEvents	Saves only warning events to a file.
infoEvents	Saves only informational events to a file.
debugEvents	Saves only debug events to a file.
file	Specifies name of the file to which to save the events. You must put quotation marks (" ") around the file name.
count	Specifies the number of events or critical events to save to a file. If you do not enter a value for the count, all events or critical events are saved to the file. If you enter a value for the count, only that number of events or critical events (starting with the last event entered) are saved to the file. Use integer values.
forceSave	When set to `TRUE`, force saves all critical events to a file. Default value is `FALSE`.

Bienvenue

Bienvenue dans l’univers Dell

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Save Storage Array Events

Description

Syntax

Parameters

Évaluez ce contenu