Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Stop Snapshot (Legacy) Rollback

Description

NOTE: With firmware version 7.83, the order of the terms in the syntax is changed to be consistent with other commands. Replace the deprecated command syntax with the new command syntax.

This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk command.

NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with potentially invalid or inconsistent data. The related snapshot virtual disk becomes disabled and unusable.

Syntax

Deprecated

stop rollback (virtualDisk [
                                 snapshotVirtualDiskName] | 
                                 virtualDisks [
                                 snapshotVirtualDiskName1 ... 
                                 snapshotVirtualDiskNameN])

New

stop (virtualDisk [
                                 snapshotVirtualDiskName ] | 
                                 virtualDisks [
                                 snapshotVirtualDiskName1 ... 
                                 snapshotVirtualDiskNameN]) rollback

Parameters

Parameter	Description
`virtualDisk`	The name of the snapshot (legacy) virtual disk for which you want to stop a rollback operation. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters or numbers, you must enclose the virtual disk name in double quotation marks (" ") inside square brackets.
`virtualDisks`	The names of several snapshot (legacy) virtual disks for which you want to stop a rollback operation. Enter the namesvirtual disks using these rules: Enclose all names in square brackets ([ ]). Separate each name with a space. If the virtual disk names have special characters or numbers, enter the names using these rules: Enclose all names in square brackets ([ ]). Enclose each name in double quotation marks (" "). Separate each name with a space.

Parameter

Description

virtualDisk

The name of the snapshot (legacy) virtual disk for which you want to stop a rollback operation. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters or numbers, you must enclose the virtual disk name in double quotation marks (" ") inside square brackets.

virtualDisks

The names of several snapshot (legacy) virtual disks for which you want to stop a rollback operation. Enter the namesvirtual disks using these rules:

Enclose all names in square brackets ([ ]).
Separate each name with a space.

If the virtual disk names have special characters or numbers, enter the names using these rules:

Enclose all names in square brackets ([ ]).
Enclose each name in double quotation marks (" ").
Separate each name with a space.

Bienvenue

Bienvenue dans l’univers Dell

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Stop Snapshot (Legacy) Rollback

Description

Syntax

Parameters

Évaluez ce contenu