CAUTION: Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION: Never operate your system with the
air shroud removed. The system may
get overheated quickly, resulting in shutdown of the system and loss of data.
Follow the
safety guidelines listed in the Safety instructions section.
Follow the
procedure listed in the Before working inside your system section.
If required, remove the two cooling
fans.
Steps
Pull the cooling shroud release
tab, and holding the touch points at the center of the cooling shroud,
lift the shroud from the system.
Figure 1. Removing the
cooling shroud
touch point
(2)
cooling shroud
release tab
Next steps
Install
the cooling shroud.
Follow the procedure listed in the
After working inside your system section.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
