Ga naar hoofdinhoud
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.

Dell PowerEdge R330 Owner's Manual

Removing a cabled hard drive from a hard drive carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Ensure that you follow the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the cabled hard drive carrier.
  4. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws from the side of the cabled hard drive carrier.
  2. Remove the hard drive from the hard drive carrier.
    Figure 1. Removing a cabled hard drive from a cabled hard drive carrier
    This figure shows removing a cabled hard drive from a cabled hard drive carrier.
    1. screw (4)
    2. cabled hard drive
    3. cabled hard drive carrier

Next steps

  1. Install the cabled hard drive in the hard drive carrier.
  2. Install the hard drive carrier into the slot.
  3. Follow the procedure listed in After working inside your system.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \