Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

Dell Migrate User's Guide

PDF

Start Migrate

Prerequisites

  • Ensure that both the old and the new PCs are connected to the same network. This is mandatory as the wireless data transfer through the network only works when both the PCs are connected to the same network. The time Migrate takes to complete a migration depends on the network speed and the amount of data to be transferred from the old PC to the new PC. It is recommended to connect to a wired network. If you use a wireless network, a 5 GHz network is faster than a 2.4 GHz network. However, migrate is designed to work over any network.
  • Ensure that both the PCs are connected to a power outlet to avoid disruptions during the migration process. If one PC were to run out of battery power, the migration or erase process would not complete successfully.

Steps

  1. Open Data Assistant on the old PC. If you do not have Data Assistant, download it from www.dell.com/DataAssistant.
  2. Perform one of the following steps:
    Figure 1. Getting started on Data Assistant
    Getting started on Dell Data Assistant
    • Click Tell me more to learn how Migrate helps you to migrate data from your old PC to your new PC. This page contains an overview video for Migrate that opens on your browser, and a link to purchase Migrate.
      Figure 2. Getting started on Data Assistant
      Getting started on Dell Data Assistant
    • Click Let's get started to start migration. When the old PC is searching for the new PC, tips to ensure that the PCs find each other are also displayed.
      Figure 3. Checking for new PC on Data Assistant
      Checking for new PC on Dell Data Assistant
  3. Based on whether you are migrating to the old or the new PCs, perform one of the following steps:

    • Applicable to the new PC only—On your new PC, launch the Dell SupportAssist from Start. At the bottom-left of the page, click Go Now to launch Migrate.

      Figure 4. SupportAssist on your new PC
      Dell SupportAssist on new PC

      On the next page, click Let's get started to start the migration process. The migration process searches for your old PC on the network. The next step takes you through the device pairing for both the old and the new PCs.

      Figure 5. SupportAssist on your new PC
      Dell SupportAssist on new PC
    • Applicable to both the old and the new PCs—after both the old and the new PCs discover each other on the network, a six-digit code is displayed on the old PC. Enter this six-digit code on the new PC. This establishes a secured connection between the two PCs for the migration process. A success message is displayed when the code entered on the new PC matches the code on the old PC.
      NOTE: The 6-digit code is refreshed every 60 seconds until the pairing of both the PCs is completed. If you fail to enter the correct pairing code five consecutive times, the migration process is terminated for security reasons. You then must close Migrate on the old PC and the new PC, and then relaunch on both PCs to try again.

      Now that both the old and the new PCs are paired, you can begin transferring your files and settings to your new PC. You can then also erase your files and settings from your old PC after you have successfully migrated your data.

      Figure 6. Successfully paired both the PCs
      Successfully paired both the PCs

Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\