Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Description	Resets the minimum and maximum warning temperature thresholds back to their default value for all temperature probes in the enclosure. NOTE: This command is not supported on SCSI RAID controllers.
Syntax	`omconfig storage enclosure action=resetalltempprobes controller=id enclosure=< ENCLOSUREID>`, where `id` is the controller ID. The `<ENCLOSUREID>` variable specifies the enclosure. In this syntax, n is a user-specified alphanumeric string.
Example to	Reset the thresholds for all temperature probes in enclosure 3 attached to connector 2 on controller 1.
Example for SAS controllers	`omconfig storage enclosure action= resetalltempprobes controller=1 enclosure=2:3`

Omconfig Reset All Temperature Probe Thresholds