Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Description	Sets the minimum and maximum warning temperature thresholds for a specified temperature probe. NOTE: This command is not supported on SAS controllers.
Syntax	`omconfig storage enclosure action=settempprobes controller=id enclosure=< ENCLOSUREID> index=id minwarn=n maxwarn=n`, where `id` is the controller ID and the temperature probe ID. The `<ENCLOSUREID>` variable specifies the enclosure. In this syntax, n is a user-specified alphanumeric string.
Example to	Set the temperature probe thresholds to 10 and 40 degree Celsius.
Example for SCSI, SATA, and ATA controllers	`omconfig storage enclosure action=settempprobes controller=1 enclosure=2 index=3 minwarn=10 maxwarn=40` NOTE: Here, temperature probe 3 resides in the enclosure attached to connector 2 on controller 1.

Omconfig Set Temperature Probe Thresholds