Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Omreport Chassis Pwrmonitoring Or Omreport Mainsystem Pwrmonitoring

Use the omreport chassis pwrmonitoring or omreport mainsystem pwrmonitoring command to view the properties of the system’s power consumption. The values display either in Watts or BTU/Hr based on the configuration. Type:

omreport chassis pwrmonitoring

omreport mainsystem pwrmonitoring

For each power monitoring profile in the system, values display for the following fields:

Power Consumption Status
Probe Name
Reading
Warning Threshold
Failure Threshold
Amperage: Location and Reading
Power Tracking Statistics
Energy Consumption
Measurement Start Time
Measurement Finish Time
Reading
System Peak Power
System Peak Amperage

NOTE: The omreport chassis pwrmonitoring or omreport mainsystem pwrmonitoring command is applicable from PowerEdge 10G system onwards that support PMBus and that have hot-swappable power supplies and not systems that have a fixed, non-redundant power supply installed.

NOTE: Power monitoring requires license to report the details. If the appropriate license is not installed or has expired, the system does not display the power consumption details of the system. For more information, see the Dell License Manager Guide at dell.com/openmanagemanuals.

NOTE: To maintain consistency across the commands, the output format of this command and the subsequent command levels has changed. So, you may have to change the user scripts as applicable.

An example output reporting power statistics in Watts is as follows:

`Power Consumption Information`
`Power Consumption`
`Index`	`: 1`
`Status`	`: Ok`
`Probe Name`	`: System Board Pwr Consumption`
`Reading`	`: 539W`
`Warning Threshold`	`: 994W`
`Failure Threshold`	`: 1400 W`
`Amperage`
`PS1 Current 1`	`: 1.2 A`
`Power Headroom`
`System Instantaneous Headroom`	`: 300 W`
`System Peak Headroom`	`: 340 W`
`Power Tracking Statistics`
`Statistic`	`: Energy consumption`
`Measurement Start Time`	`: Thu May 28 11:03:20 2011`
`Measurement Finish Time`	`: Fri May 28 11:05:46 2011`
`Reading`	`: 5.9 KWH`
`Statistics`	`: System Peak Power`
`Measurement Start Time`	`: Mon May 18 16:03:20 2011`
`Peak Time`	`: Wed May 27 00:23:46 2011`
`Peak Reading`	`: 630 W`
`Statistics`	`: System Peak Amperage`
`Measured Since`	`: Mon May 18 16:03:20 2011`
`Read Time`	`: Tue May 19 04:06:32 2011`
`Peak Reading`	`: 2.5 A`

NOTE: Power Management features are only available for PowerEdge systems that have hot-swappable power supplies and not systems that have a fixed, non-redundant power supply installed.

Добро пожаловать

Добро пожаловать в Dell

Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Omreport Chassis Pwrmonitoring Or Omreport Mainsystem Pwrmonitoring

Оценить этот контент