Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Description	Resets the minimum and maximum warning temperature thresholds back to their default values. NOTE: This command is not supported on SAS controllers.
Syntax	`omconfig storage enclosure action=resettempprobes controller=id enclosure=< ENCLOSUREID> index=id`, where `id` is the controller ID and the temperature probe ID. The `<ENCLOSUREID>` variable specifies the enclosure. In this syntax, n is a user-specified alphanumeric string.
Example to	Reset the thresholds for temperature probe 3, residing in the enclosure attached to connector 2 on controller 1, to the default values.
Example for SCSI, SATA, and ATA controllers	`omconfig storage enclosure action=resettempprobes controller=1 enclosure=2 index=3` NOTE: Here, temperature probe 3 resides in the enclosure attached to connector 2 on controller 1.

Omconfig Reset Temperature Probe Thresholds