Gå vidare till huvudinnehållet
  • Lägg beställningar snabbt och enkelt
  • Visa beställningar och kontrollera leveransstatus
  • Skapa och kom åt en lista över dina produkter
  • Hantera dina webbplatser, produkter och kontakter på produktnivå från Dell EMC med hjälp av företagsadministration.

Dell Latitude 7480 Owner's Manual

Security screen options

Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.

Default setting: Not set

System Password
Allows you to set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.

Default setting: Not set

Internal HDD-2 Password
Allows you to set, change, or delete the administrator password.
NOTE: Successful password changes take effect immediately.

Default setting: Not set

Strong Password
Allows you to enforce the option to always set strong passwords.

Default Setting: Enable Strong Password is not selected.

NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one uppercase character, one lowercase character and be at least 8 characters long.
Password Configuration
Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
  • min-4—by default, if you want to change you can increase the number
  • max-32—you can decrease the number
Password Bypass
Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they are set. The options are:
  • Disabled
  • Reboot bypass

Default setting: Disabled

Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.

Default setting: Allow Non-Admin Password Changes is selected.

Non-Admin Setup Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled the setup options are locked by the admin password.

Option "allow wireless switch changes" is not selected by default.

TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
  • UEFI capsule Firmware updates—enabled by default
  • TPM On—enabled by default
  • Clear
  • PPI Bypass for Enable Commands
  • PPI Bypass for Disabled Commands
  • Attestation enable—enabled by default
  • Key storage enable—enabled by default
  • SHA-256—enabled by default
  • Disabled
  • Enabled—enabled by default
NOTE: To upgrade or downgrade TPM 2.0, download the TPM wrapper tool—software.
Computrace
Allows you to activate or disable the optional Computrace software The options are:
  • Deactivate
  • Disable
  • Activate—enabled by default
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes are allowed
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.

Enable CPU XD Support—enabled by default

OROM Keyboard Access
Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options are:
  • Enabled
  • One Time Enable
  • Disable

Default setting: Enable

Admin Setup Lockout
Allows you to prevent users from entering Setup when an Administrator password is set.

Default Setting: This option is enabled

Master password lockout
This option is not enabled by default

Betygsätt det här innehållet

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
0/3000 characters
  Ange betyg (1–5 stjärnor).
  Ange betyg (1–5 stjärnor).
  Ange betyg (1–5 stjärnor).
  Ange om artikeln var användbar eller inte.
  Kommentarer får inte innehålla följande specialtecken: <>()\