Unsolved
This post is more than 5 years old
1 Rookie
•
18 Posts
0
13678
August 3rd, 2014 10:00
PERC H310 WHS 2011 driver
Has anyone managed to resolve this yet ?
I also have a PERC H310 in a mini server running WHS 2011, and have the same issue, I currently have the driver -
http://www.dell.com/support/home/ed/en/edbsdt1/Drivers/DriversDetails?driverId=NY8FH&fileId=3099677476
Loaded in but no other Dell driver packages including MS Server 2008 (which WHS is derived from) will install
Some other forum posts imply its to do with UEFI boot, but by pressing F2 I don't get into firmware but sometime it allows the H310 to been seen in WHS, but if I reboot the server I loose the PERC
No Events found!
Daniel My
10 Elder
•
6.2K Posts
0
August 3rd, 2014 10:00
Hello
The driver you are using is a Windows 7 32 bit driver. WHS 2011 is 2008R2. 2008 R2 is a 64 bit operating system. Here is the 2008R2 driver:
http://www.dell.com/support/home/ed/en/cybsd1/Drivers/DriversDetails?driverId=1HHG8&fileId=3389750350&osCode=WS8R2&productCode=poweredge-r520&languageCode=EN&categoryId=SF
If you need further assistance then please provide more details.
Thanks