Start a Conversation

Unsolved

This post is more than 5 years old

W

4526

December 27th, 2003 10:00

Need Help Formatting Hard Drive!

Hi,

I am attemptin to format the hard drive of my Dell Dimension 8200 running Windows XP. I am using the Dell diagnostics floppy that I downloaded from the site. I insert the floppy, start up, select 'install ICE CD-ROM drivers' or something like that, and type 'format c:' the respnonse is 'cannot format a network drive'. I am not on a network. Is there another way I can format or make it so that this message does not appear?

Thanks,

Will

166 Posts

December 27th, 2003 17:00

Boot using the XP cd and do it from there..

10 Elder

 • 

46K Posts

December 27th, 2003 20:00

Will_S.

You format the C: drive by reinstalling the XP operating system and instructions for this are here,

http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

The following article, that's specific to the D/8200 may help, 

 http://support.dell.com/us/en/kb/document.asp?DN=1066312

Prior to installing, make the CD/ROM the first boot device and remember to disconnect all external peripherals
from the computer, except the keyboard and mouse. 
While installing, delete exsisting partitions (Paragraph 5) when you are prompted,then remake and format
them (Paragraphs 6&7), followed by installing XP. 
You will have to reload the drivers and applications. etc which should be on the CDs sent with the computer and you will need to download and install the MicroSoft Critical Updates, plus any other updates you deem necessary, after installation. 

Bev.


 

3 Posts

December 29th, 2003 23:00

will this method also work with dim 4400? is it absolutley necc. to use cd to perform reformat?

2 Intern

 • 

720 Posts

December 29th, 2003 23:00

Yes. Use the WinXP CD (boot from the CD) or use a program such as 'partition magic'.
No Events found!

Top