Good day,

I have a fairly easy question, I have transplanted a SAN to a new location with different networking.

I know the old SPa and SPb IPs but I am having trouble accessing those IPs. Does anyone have experience with re-IPing these?

Which of the 2 ports should I be plugging my laptop into? (top/bottom)

Any general tips? (Windows XP Laptop)

AnkitM wrote the following in a similar thread:

"It seems you have forgotten the IP Address to access the CX4.

Anyhoo, You can connect using to CLARiiON using Service LAN ports.  You would only need to connect to one either SPA or SPB.

Configure your service laptop to use the address 128.221.1.249/24, plug the cable to Service LAN Port and try to ping 128.221.1.250 or 128.221.1.251 (the default service addresses for SPA and SPB). If this works you can browse to http://128.221.1.250 and try with the default access credentials i.e. (admin/password). If this doesn't work out for you then you will need to create a PPP Connection to either of the SP.

Refer: How to connect to a Clariiion through PPP Connection

How to connect to a Clariiion through PPP Connection