Unsolved
This post is more than 5 years old
10 Posts
0
447
January 26th, 2007 08:00
Client support for Dos v6.22
Okay okay, I know this is pushing it a bit, but we have a legacy till system which we'd like to migrate onto the Celerra, but we cannot get it to connect to the share.
Output from the server log as follows:
2007-01-26 14:46:38: SMB: 3:[vdm1] Client= OS='<90><90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp', LM='<90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp' not registered capa=0x0 (R=0/8)
2007-01-26 14:46:38: SMB: 3:[vdm1] Client=TILL07 OS=<90><90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp LM=<90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp Extra=O<9A> type=- (1)
Anyone got any ideas?
Output from the server log as follows:
2007-01-26 14:46:38: SMB: 3:[vdm1] Client= OS='<90><90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp', LM='<90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp' not registered capa=0x0 (R=0/8)
2007-01-26 14:46:38: SMB: 3:[vdm1] Client=TILL07 OS=<90><90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp LM=<90><90><90><90><90><90><90><90><90><90>ú^O^Këþô^Fp Extra=O<9A> type=- (1)
Anyone got any ideas?
No Events found!
odonovan_kevin
33 Posts
0
January 31st, 2007 04:00
odonovan_kevin
33 Posts
0
January 31st, 2007 05:00
Have you tried it again today?
Nick-4vLB0
10 Posts
0
January 31st, 2007 05:00
As of last night, we've been upgraded to the latest release (5.5.25.2) due to an unrelated issue. We were previously on 5.5.21.4.
Should I expect this client to be able to connect? Is it supported?