When youre sure that you have setup the optional management of a EQL group check if there is a Firewall between your browser with the java applet and the EQL group IP. IIRC there is port 3003 together with the 80/443 needed. Connecting via SSH to the EQL Group is also possible.
Your volume need a propper ACL so that the server is allowed to connect. Check with a "ping" first if the server can reach the iSCSI WKA of the EQL.
When using Windows as OS on the server you might want to install the latest EQL HIT Kit.
Is your Host which trying to connect to the EQL management WKA located in the same subnet or a different one?
If its the same than you only have to look to the Host FW. If not than there is mostlikly a security device on your gateway or behind. So ask the network administrator if he can check the logs for ports which are blocked.
Why you cant use a Host which is located in the subnet of the EQL? Makes life much easier for administration :)
sadly we do not have support for it, I am still having issues connecting remotely to the dell san but can connect to it with laptop plugged into the switch
Origin3k
4 Operator
•
2.4K Posts
0
February 2nd, 2016 08:00
When youre sure that you have setup the optional management of a EQL group check if there is a Firewall between your browser with the java applet and the EQL group IP. IIRC there is port 3003 together with the 80/443 needed. Connecting via SSH to the EQL Group is also possible.
Your volume need a propper ACL so that the server is allowed to connect. Check with a "ping" first if the server can reach the iSCSI WKA of the EQL.
When using Windows as OS on the server you might want to install the latest EQL HIT Kit.
Regards,
Joerg
majorkuso1
7 Posts
0
February 2nd, 2016 08:00
I can ping the san and have access through ssh on putty, but not sure how to test for firewall.
majorkuso1
7 Posts
0
February 2nd, 2016 12:00
I can ping the SANis there a way i can test if the San is blocking specific ip connections
majorkuso1
7 Posts
0
February 3rd, 2016 08:00
the server has its firewall off so i imagine it is the network asa
Origin3k
4 Operator
•
2.4K Posts
1
February 3rd, 2016 08:00
Is your Host which trying to connect to the EQL management WKA located in the same subnet or a different one?
If its the same than you only have to look to the Host FW. If not than there is mostlikly a security device on your gateway or behind. So ask the network administrator if he can check the logs for ports which are blocked.
Why you cant use a Host which is located in the subnet of the EQL? Makes life much easier for administration :)
Regards,
Joerg
majorkuso1
7 Posts
0
February 3rd, 2016 09:00
im not sure why I can't get on the same subnet as the host I tried setting the interfaces as such but no reply could be a vlan issue
majorkuso1
7 Posts
0
March 9th, 2016 07:00
We have a Cisco sg300 28 p switch that he San is connected to does that make a difference?
majorkuso1
7 Posts
0
March 9th, 2016 09:00
sadly we do not have support for it, I am still having issues connecting remotely to the dell san but can connect to it with laptop plugged into the switch
majorkuso
18 Posts
0
March 15th, 2016 08:00
so I am best off making the SAN ip addresses in the same subnet as the machines I wanrt to access it?
majorkuso
18 Posts
0
March 15th, 2016 08:00
so basically I would share the volume from the server to any other host machines?
majorkuso
18 Posts
0
March 15th, 2016 08:00
so there would be no way to give access to different machines outside of the vlan?
majorkuso
18 Posts
0
March 15th, 2016 08:00
would a WS-C3750X-48T-S be sufficient?
majorkuso
18 Posts
0
March 15th, 2016 08:00
would a WS-C3750X-48T-S handle the SAN traffic?
majorkuso
18 Posts
0
March 15th, 2016 08:00
basically i want to set it up to allow different systems access to the SAN as needed
majorkuso
18 Posts
0
March 15th, 2016 09:00
I really am grateful for the help I found a dell power connect 2748 but i am not familiar with that system.