
UNSOLVED
RM
Ray Magill
3 Posts
0
1499
November 7th, 2018 11:00
EquilLogic PS4000 - Boot Problem
I've just started my EqualLogic today and it seems to be hanging. The unit was offline and unplugged for about a month. See Console log below. Any help would be appreciated.
SP:1541520653.23:ses.c:2579:WARNING:28.3.85: Power cooling module 0 is turned off or not receiving power.
SP:1541520653.28:emm.c:2226:WARNING:28.3.51:Warning health conditions currently exist.
Correct these conditions before they affect array operation.
Power supply failure.
There are 1 outstanding health conditions. Correct these conditions befo re they affect array operation.
#########################################################
# #
# Dell (tm), Inc. Storage Array #
# Copyright 2001-2008 #
# 70-0120 Rev=R10 SN=RMS0939554G14DB ECO=C00 #
# #
#########################################################
-- Type Ctrl-p key to enter setup mode --
BOOTROM version 8.1.1
Build Date: Mon Apr 19 01:38:54 EDT 2010
Total memory: 0x80000000 bytes (2048MB)
NP Loading ...Done
SP Loading ...Done
Dell Inc. Storage Array
Copyright 2001-2015 Dell Inc.
SP:3.81:mips_pss_init.c:363:INFO:28.2.107:Control module in slot 0 with serial number RMS0939554G14DB is designated as active.
SP:1541521328.03:ppool_nvram.c:380:WARNING:15.3.0:NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
MFS set up
Building databases...
SP:1541521347.96:emm.c:1288:INFO:28.2.6:Enclosure serial number: SHU0937897YC594 .
SP:1541521349.59:events.c:574:ERROR:14.4.17:0:Orphan drive: drive LUN 1 (e9430a8a0900-fb71a08c-3) no longer belongs to RAID LUN 0 (e9430a8a0900-bac282a8-20a2a1a4) and will be made into a spare disk.
SP:1541521355.03:cache_driver.cc:1070:WARNING:28.3.17:Active control module cache is now in write-through mode. Array performance is degraded.
Responses (0)
Solutions (0)
