1 Rookie
•
2 Posts
0
314
Missing Startup settings after DIA image restoration.
Hello,
I created a windows 11 gold image on a VM. However, after the image restoration, the Startup settings were missing from the recovery mode. I checked the VM and confirmed the startup setting is available. The problem occurred after restoring the image. Has anyone experienced this problem before? Any suggestions to fix it? Thank you!!
tyyt2009
1 Rookie
1 Rookie
•
2 Posts
1
April 11th, 2024 18:25
It was due to SATA/NVME operation type set to RAID on.
After switching it to ACHI/NVMe and restoring the image again, the Startup settings show up in the Recovery Mode.
DELL-Tyler M
Moderator
Moderator
•
309 Posts
0
July 9th, 2024 18:42
@tyyt2009 check this out > Windows 10 - Recovery - System-Reset failed - Workaround: add most recent drivers to WinRE | DELL Technologies
Thanks,
Tyler
PM1985
1 Rookie
1 Rookie
•
1 Message
0
July 19th, 2024 20:57
@tyyt2009 you just saved us a world of hurt!!