FX2s networking

I have a FX2s chassis with two FC630 compute modules.  The first module is a 1Gb passthrough module and the second is 10Gb passthrough module.  I've installed MS Server 2019 on both FC630 servers but can only get 1 network card to show up connected on each server  there is a second NIC but says disconnected and cannot get it working. None of the 10Gb Nics ever pass through are show connected. From the documentation I've seen with a 4 bay Chassis it should passthrough 2 Nics per server.  Not sure what I'm doing wrong any help would be appreciated.

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual | Dell US