Moderator

 • 

17.9K Posts

August 25th, 2016 07:00

Heidi_SF,

Check the printer settings to see if the printer is set for Duplex. The steps are listed below as well as the online users manual.

Duplex
You can set the printer to print copies on both sides of paper. 1 Load the documents to be copied in the DADF. For details about loading a document, see "Loading an Original Document". 2 Press Copy from the home screen 3 Press the left/right arrows to select Duplex. 4 Select the binding option you want. • 1->1 side: Prints in normal mode. • 1->2 Side Long Edge: Prints pages to be read like a book. • 1->2 Side Short Edge: Prints pages to be read by flipping through it like a note pad. • 2->1 Side Long Edge: Scans both sides of the originals and prints each of them on a separate sheet. • 2->1 Side Short Edge: Scans both sides of the originals and prints each one on a separate sheet, but the information on the back side of the printout is rotate 180°. • 2->2 Side Long Edge: Scans both sides of the original and prints on both sides of the paper. This function produces exactly the same print out from the originals. Press Start ( ) on screen to begin copying.

Below is the link to download the online users manual.

Dell 2375dfw Online Users Manual

No Events found!

Top