Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi all, I need info if someone knows or maybe tested ,does this Dell EMC DSS8440 4U server can work with 4 x Nvidia H100 PCIe 80GB?? Thanks all for help .
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello everyone, I have a Dell PowerEdge R250 server. The machine was operating normally but lost its network connection. When I checked the driver management, the network card hardware was not displayed.I tried restarting the server, but the network card came back, and it stopped working for a while
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, I was wondering if a few good people could help me. I have a Dell t320 server that I'm looking to upgrade the CPU, right now it's got the Xeon E5-2420 v2. its got the maximum limit of RAM of 192 GB and it's a VMware ESXI host with 5 VMs on it I want to upgrade the CPU for more use and more po
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi, Our organisation is currently looking into using Entra ID for a number of apps. Does anyone know whether OME supports authentication using Entra ID? If so has anyone successfully implemented it? I just wanted to see if this is possible before disappearing down an authentication rabbit h
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Dear community, I have a Dell T620 that shuts down randomly. I could be in the BIOS /Lifecycle Controller/Proxmox screen and the shutdown could occur. No power to the front, no power to IDRAC. Running a full hardware diagnosis shows no hardware issues. I need to coax the server to boot by unpluggin
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi everyone, I have the server dell r740 and already install dell EMC open manage. so, i have plan to remove or uninstall this feature. what's the impact if i do to un-install dell EMC open manage ?
Question
•
Dell OpenManage Essentials
Community Accepted Solution
i have a T420 server box with sandy bridge motherboard. Yet every where I look, the specs say this board will support the E5-2400 v2 IVY bridge cpus, even gemini and chatgpt say this. Can i have a definitive answer about this because I have two of these boxes and four e5-2470 v2 CPUs. Will this ser
Question
•
Systems Management General
Community Accepted Solution
Dear Dell Team, We're encountering a boot failure with Dell HFS480G3H2X069N SSDs on Dell servers post-OS installation in UEFI mode. Multiple Ubuntu versions were tested, all resulting in boot failures despite successful installations: Disk health was verified via SMART attributes, full SMART test
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello everyone, I am reaching out to seek guidance on a matter related to our Dell PowerEdge R440 servers. Recently, we received communication from VMware regarding a potential increase in subscription prices. In an effort to manage costs, we are exploring options to optimize our hardware configurat
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have a Dell R610 with RAID5 configured with one virtual drive using all available disks. I have (4) physical disks in this virtual drive, but they are small and I want to replace them with larger disks. My goal is to replace each drive with larger drives and my hope is to not lose data. I am runni
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, I have created catalog, then created baseline with one R430 server, then I did check compliance, and report shows me that many drivers needs to be updated but I cannot check any item on this report when I point mouse on check box it shows me "Device does not support Firmware Update" When I
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Team, We recently had a predictive failure on one of our raid 5 drives, the global hotspare kicked off and rebuilt the drive successfully. However, after the rebuild was completed. We swapped out the bad drive with a new one; the server won't spin up the new drive to ass
Question
•
Rack Servers
Community Accepted Solution
Is there any way to get hold of the license that came with the machine?
Question
•
PowerEdge Hardware General
Community Accepted Solution
We have a Poweredge T640 Server that has a DELL PERC H330 controller. There are 4 drives configured in RAID10. One of the drives is flashing orange. I have a replacement drive (not spare hotswap) my question is, as im getting conflicting information when searching, is, does this Raid Controller supp
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hi, We have a M640 blade wich is reporting CMOS battery fault. We have changed it but the alarm is still present. I saw a procedure to clear CMOS battery on iDRAC8 but I am unable to find that option on iDRAC9. Is that option removed? Should be cleared automatically or I have to reset iDRAC maybe?
Question
•
Blades
Community Accepted Solution
Hi, I am trying to replace a failed 600gb SAS (P/N : 1XF230-150) in my PowerEdge R430 server. Looking online it seems to tell me to switch the drive to "Offline" in the Dell GUI. I only have the options to "Blink" and "Unblink". How to I go about making sure the drive is offline before I physicall
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
good morning, nice community! I am looking for part numbers of the cables I should use with the 0D2DTT power distribution board. thanks in advance, Dmitry
Question
•
Power & Cooling
Community Accepted Solution
Hello, Dell Support & Community I am reaching out regarding an issue with my Dell PowerEdge R520 server. It appears that the motherboard is malfunctioning, and I am in the process of arranging a replacement. However, before proceeding, I would like to inquire about the compatibility of the moth
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, Having some trouble getting iDrac 8 to connect/authenticate to JumpCloud LDAP. The only guidance I could find is a little dated (https://wiki.maxcorp.org/ldap-configuration-idrac-6/) Im unable to get this working on iDrac 8 (Dell R330) - configuration is as follows: Generic LDAP Enabled:
Question
•
Rack Servers
Community Accepted Solution
I have a Dell PowerEdge R610 with iDRAC6 enabled for use with IPMI and a PERC6/i RAID controller and am monitoring the server status remotely. Specifically I am monitoring the drive status via ipmitool and am having issues getting the proper status when the first drive in the RAID array is faulted.
Question
•
PowerEdge HDD/SCSI/RAID