Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I thought this was an easy to answer question, but I have been getting a lot of foggy opinions. I have an APC 208v UPS and am receiving 3 Dell Precision Rack 7960 units with the 2400 watt 250V power supplies. My question is can I plug these into the C20 plugs on my PDUs and is 208 enough to r
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi Team, We have been noticing error on Dell OME console and plugins. it states as below. " This plugin does not meet the minimum requirements for installation" Appliance resources are not sufficient to either install or continue to run the Update Manager plugin efficiently:The OME VM is not confi
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
LIC017 MessageThe license file is corrupted, has not been unzipped, or is not a valid license file.Detailed DescriptionThis error can occur when the license file: 1) Signature is not valid. 2) Data is not in the correct format. 3) Missing needed data. 4) Contains unknown data. 5) Has not been unzipp
Question
•
Systems Management General
Community Accepted Solution
Hi, I have a dell poweredge r750 server, with raid 5.1 sas hdd failed, if I replace the faulty hdd, will the raid rebuild be done automatically or do I have to rebuild it?
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, I have an older PowerEdge T330. It has 2 hot swap drives that are esata and in a mirror raid array. I ordered a replacement drive from the dell website that says its for this particular machine with the service code, express code and all that. However what arrived is a Sata drive, Not esata
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all,on a R6515 there is a mini 6-pin power connector on motherboard. You can see it on the "Dell PowerEdge R6515 Installation and Service Manual, page 106 or here https://www.dell.com/support/manuals/en-us/oth-r6515/per6515_ism_pub/system-board-connectors?guid=guid-1a4063fa-f53f-4f8e-90ce-fe498c8
Question
•
PowerEdge Hardware General
Community Accepted Solution
Customer using HCI based on VMware VSAN Ready nodes running on Dell PowerEdge servers. So, I'm wondering does CloudIQ support to collect those data? any concerns or limitation? Thank you. Panat
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi there, I own a Dell Poweredge R620, it is usually running a Minecraft server using Java JDK 21, the operating system it is using is Ubuntu Server. I currently have it setup so it automatically gracefully reboots every night at 6:30 AM. I would like to if that reboot schedule could cause harm to m
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello all I’m trying to run a power edge r610 fan externally for a project any idea how many volts the fan takes I’ve ran it on 12 I noticed the psu getting warm so wanting to double check how many volts they take?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi everyone, I have a question regarding PowerEdge Server BIOS. Does the BIOS have an option to turn on Intel Trusted Domain Extensions (TDX) support? For example, server PowerEdge R760 (link: PowerEdge R760 Rack Server | Dell USA) Sorry if this question is not for the topic I selected. I wasn't s
Question
•
PowerEdge Hardware General
Community Accepted Solution
Does the PE R450 server support addition of 2 x 16Gb FC HBA cards? Need to Connect it into two SAN storages using FC. Can somebody help me out here?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, I want to migrate to OME v4 from a 3.10.2 version I managed to complete the first steps of the process on the v3 appliance but on the v4 appliance (destination) step 3 is stucked : Step 3: Check For Migration Readiness (import) Impossible to go further... Is there a solution to unblock t
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi, The customer wants to test the RAID 1 with following steps to verify its reliability (the data are stored twice by writing them to both the data drive and a mirror drive). Remove the first one HDD (Hot plug) and check if server is working properly. Insert the first one HDD to the server (H
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I'm tinkering with a PowerVault 4000 which apparently contains some R620 under the hood. I've been doing my reading before opening this discussion. I had one successful iDRAC upgrade and the rest have had to be rolled back. The system started with BIOS 2.4.3 and iDRAC 1.57.57 (and later I noticed
Question
•
PowerEdge Hardware General
Community Accepted Solution
Could someone please suggest me how to resolve this with steps. Thanks in advance Please find more information below:- TENABLE-35291 CVE-2004-2761, CVE-2005-4900 The remote service uses an SSL certificate chain that has been signed using a cryptographically weak hashing algorithm (e.g. MD2, MD4, MD
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, I have some FC630s that I'd like to use the 2x2.5" drive bays on the front. The BIOS shows an onboard SATA/RAID controller, however it seems like there is some kind of cable or other module that I need to install under the drive cage to make it so the disks show up. I can't seem to find any
Question
•
Blades
Community Accepted Solution
Hello, I have a C6420 with 4 node, spec are 2x 6140M, 64gb ram, X710 LP card in the pcie slot, H330 raid. 2x 1600W. I can't seem to get video out of the mDP port, no matter what. I have try multiple miniDP adapter and bought a mDP to DVI cable to see if it a adapter issue. Also try multiple monitor.
Question
•
PowerEdge Hardware General
Community Accepted Solution
It seems in the past day or two Dell had removed the ability to view the as build specs on servers from the support page. I recently purchased a 2nd have power edge. I checked it on Friday, got the part number for the BOSS card. Went to double check it again this morning and now I can’t get a parts
Question
•
PowerEdge Hardware General
Community Accepted Solution
I recently got a second-hand dell poweredge T330.I accessed the idrac console and updated idrac to the latest version (2.85.85.85). I then proceeded to try upgrade the bios from 1.3.2 to 2.19.1.The computer rebooted and I could see after the reboot a progress window for the bios update. I went to d
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello! I have a brand new server Dell R750 and it has 2 SSD drives (480 GB, manufactured by Micron based on the part number) in RAID1, and I bought for replacement a new ssd, but the new one is from Samsung, same disk size, but different part number (but still with Dell brand on it). Are there any c
Question
•
PowerEdge HDD/SCSI/RAID