Search Results (55)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I recently took over IT for a small school that is running a used PowerEdge R320 running Windows Server Core 2016. For the first couple months everything was running just fine. When I came in one day, I could hear from a few rooms away that the fans were running at full speed on the server. I am not
Question
•
Power & Cooling
Community Accepted Solution
good morning, nice community! I am looking for part numbers of the cables I should use with the 0D2DTT power distribution board. thanks in advance, Dmitry
Question
•
Power & Cooling
Community Accepted Solution
good morning, nice community! I would like to learn the part number of the GPU shrouds for a Dell T640. thanks in advance and best regards, Dmitry
Question
•
Power & Cooling
Community Accepted Solution
I have a T630 PowerEdge and recently purchased and installed a new GPU cooling fan assembly. I'm questioning if it is working. There are 2 fan assemblies installed at the rear of the case in the cooling shroud but iDRAC -> Hardware -> Fans only shows 2 System Board fans installed. I wa
Question
•
Power & Cooling
Community Accepted Solution
Closed
Hoping for some suggestions. I've become the senior IT admin recently after the last of the old crew moved on and recently we had a power outage knock out all of our servers due to the batteries in one of our two old Dell UPS 4200W backups failing. I recommended replacing the unit with newer, more
Question
•
Power & Cooling
Community Accepted Solution
Closed
Hello,We have a PowerEdge T640 with a fan blowing full speed all the time because of a cooling alert on sensor "Fan Ext R" saying it's running a 0RPMThe thing is there's nothing plugged on those pins and there's no external fan at allAll 6 internal fans are OK but running at full speedI tried reseti
Question
•
Power & Cooling
Community Accepted Solution
Closed
We have 3 Dell PowerEdge servers currently racked up, one each R720, R720Xd and R730. The R720Xd and R730 are currently active and the R720 is powered off and may never be used again. The R720 has 1100 watt PSUs fitted, P/N NTCWP, and the R720XD has 750 watt PSUs fitted. One of the PSUs in the R72
Question
•
Power & Cooling
Community Accepted Solution
Closed
Helo guys. Does anybody know how I identify the correct number of a GPU card inside the server. Because watching from the Idrac, I got : 21, 22, 23 and 24......... When I open the server, I see a big label on the cover of the GPUs Bay, with the follow numbers: GPU 1, GPU2, GPU3 and GPU4.............
Question
•
Power & Cooling
Community Accepted Solution
Closed
How do I change the LCD on my front bezel to display the temperature in Fahrenheit instead of Celsius. Seems like this should be easy to do, but it seems to be eluding me.
Question
•
Power & Cooling
Community Accepted Solution
Closed
Happy Friday all, I see that the chassis has 4 fans in front and 5 fans in rear. The chassis doesn't come with these fans, so I have to purchase them from a 3rd party. Do the fans plug into a tray or bank? Would I need to buy the trey as well? Thank you!
Question
•
Power & Cooling
Community Accepted Solution
Closed
Hey, I just received the following warning from my IDRAC module: 'Detailed Description: Air filter in bezel is not functioning as expected and needs replacement.Recommended Action: Replace the Air filter with a cleaner air inlet.Message ID: BEZL0003System Model: PowerEdge R6515' . As far as I kno
Question
•
Power & Cooling
Community Accepted Solution
Closed
Hi! Ideally I want to be able to use 1 AC PSU and 1 DC PSU for a r730xd server but I've learned that this is not possible. So when trying to use 2 DC PSU (Astec Power 1100W model E1100D-S0 Rev A00-00) the server starts and I see Initialize PCI, USB and Video on the attached monitor and after that m
Question
•
Power & Cooling
Community Accepted Solution
Hi guys, I just installed a Nvidia Quadro P4000 into my R730 and after powering up, the fans turn at 15k rpm, even if CPU is at zero %. Temperature inside is at 24 celciusPSU usage: 252 wattsCPU 1 temp: 36 celciusCPU 2 temp: 37 celcius MY CONFIG: 2x Xeon e5-2680v4128gb ram2x HDD 1.2TB 12k2x 750w
Question
•
Power & Cooling
Community Accepted Solution
My T410 has 1 CPU and 2 power supplies. With only one power supply plugged into power, the chassis fan is quiet, but when I plug-in the second power supply, the chassis fan speeds up. Any ideas on what would cause this behavior? ThanksJerry
Question
•
Power & Cooling
Community Accepted Solution
The fans don't go below 48% of max PWM on a brand new R450 with the CPU steady at 3%. The server has a lightweight config: 1 CPU, 2 x 8 GB RAM, Windows Server 2022 doing nothing for now. Only 3 disk bays are populated with 10K HDDs. 5 fans. All Dell parts, nothing third party. Ambient temp is 73F (
Question
•
Power & Cooling
Community Accepted Solution
I have the following in iDrac as Ive just added the 2nd 750W PSU Running the update check in iDrac it doesnt prompt to update the above parts when it looks like there is an update https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=jv7g6&oscode=wst14&productcode=power
Question
•
Power & Cooling
Community Accepted Solution
I have got 2 identical new T350 servers. The first one went without issues, the second one is starting with higher fan noise, as soon as the OS, Windows Server 2022 Standard is starting. The hardware check showed the warning: "Systemboard Inlet Temp: Temperature Sensor LowNonCrit -> l
Question
•
Power & Cooling
Official Solution
Hi, Since I have installed front fan assembly in my T620 the back fans are showing 0%, but the fans are actually spinning around 1000 RPM. When running on a higher RPM percentage is displayed properly Is this a bug, if yes, is there any way to fix it? Thanks, Istvan
Question
•
Power & Cooling
Community Accepted Solution
Hi all, I search to change the MTU value with the command: "esxcli network vswitch standard set --mtu=1250 -v vSwitch0", but he returns: « Unable to set MTU. Valid MTU values are 1280-9190". I understand the msg, but I need to found why, and a command to show the limits of the MTU ran
Question
•
Power & Cooling
Community Accepted Solution
What sort of fan speed (%) are you experiencing with your Dell R450? Are you running it Maximum Performance or something else in BIOS? The summary of my issue is a new Dell R450 server (2 x Xeon Silver 4314) running only Vmware ESXi 6.7 and no virtual machines is hitting 46% fan speed. I tried in
Question
•
Power & Cooling