I'm a bit lost still. Ran the interop navigator, and everything I've tried still doesn't show me what Symm codes will run with which Solutions Enablers. I guess I don't know which 'path' to run down once the navigator starts.
Surprise, surprise, surprise! The release notes have a section discussing which Enginuity codes the Solutions Enabler rev supports. It directs you back to ELab Navigator which is no help. Not surprising at all. Wow.
My powerlinkFU must be strong; actually it was easy.
"Solutions Enabler versions required for Enginuity levels" emc201214
Enginuity 5771 requires a minimum version of Solutions Enabler 6.2. However, it is recommended that you use version 6.5 or above due to fixes included in the later revisions of the software. See the latest Release Notes for details. Reference emc120125 for what version of EMC mainframe software products are required for 5771.
Enginuity 5772 requires a minimum version of Solutions Enabler version 6.4. However, it is recommended that you use version 6.5 or above due to fixes included in the later revision of the software. See the latest Release Notes for details. Reference emc158134 for what version of EMC mainframe software products are required for Enginuity 5772.
Enginuity 5773 requires a minimum version of Solutions Enabler 6.5. Reference emc183935 for what version of EMC mainframe software products are required for Enginuity 5773.
Enginuity 5874 requires a minimum version of Solutions Enabler 7.0. Reference emc213135 for what version of EMC mainframe software products are required for Enginuity 5874.
Enginuity 5875 requires a minimum version of Solutions Enabler 7.2. Reference emc267712 for what version of EMC mainframe software products are required for Enginuity 5875.
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 06:00
Launch E-Lab Interoperability Navigator
Scott_M1
14 Posts
0
March 27th, 2012 06:00
Thx.
Scott_M1
14 Posts
0
March 27th, 2012 08:00
I'm a bit lost still. Ran the interop navigator, and everything I've tried still doesn't show me what Symm codes will run with which Solutions Enablers. I guess I don't know which 'path' to run down once the navigator starts.
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 10:00
yeah, i could not find a good combo of objects either. Another option is to look at the release notes
Home > Support > Technical Documentation and Advisories > Software ~ S ~ Documentation > Solutions Enabler
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 11:00
ohh..you'll like this one
https://elabnavigator.emc.com/vault/pdf/EMC_VMAX_ESSM.pdf
https://elabnavigator.emc.com/vault/pdf/EMC_DMX_ESSM.pdf
Scott_M1
14 Posts
0
March 27th, 2012 11:00
Surprise, surprise, surprise! The release notes have a section discussing which Enginuity codes the Solutions Enabler rev supports. It directs you back to ELab Navigator which is no help. Not surprising at all. Wow.
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 12:00
go easy on the caffeine there Scott
Scott_M1
14 Posts
0
March 27th, 2012 12:00
I'm In An Endless Loop draining all the CPU power and memory cycles from the Powerlink website!!!!!!!!!!!!!!!!!!!!
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 12:00
https://elabnavigator.emc.com/vault/pdf/Software_Enabler.pdf
RobertDudley
2 Intern
•
448 Posts
0
March 27th, 2012 12:00
My powerlinkFU must be strong; actually it was easy.
"Solutions Enabler versions required for Enginuity levels" emc201214
Scott_M1
14 Posts
0
March 27th, 2012 12:00
Powerlink is SUCH A JOKE!!!!! USELESS!!!!!!!!!!!!!!
Scott_M1
14 Posts
0
March 27th, 2012 12:00
Wait........wait, wait, wait, wait, wait. Did.....???? Huh???? What just happened????? Where am I?
Scott_M1
14 Posts
0
March 27th, 2012 12:00
I give up. Rack this one up on my long list of powerlink search failures.
Scott_M1
14 Posts
0
March 27th, 2012 12:00
I'm surprised Powerlink isn't a Las Vegas venue.
People making bets on how long it will take for someone to find the real answer they are looking for.
dynamox
9 Legend
•
20.4K Posts
0
March 27th, 2012 12:00
you are welcome