HI all,

I'm using following command to get dev, host and port:

symcfg -sid ID -

list -host hostname

Symmetrix ID      : ID

Host Name         : test

Identifiers Found : WWN1
                         WWN 2

Device  Cap(MB)  Attr  Dir:P
------  -------  ----  ----
0011          2         7C:1,10C:1
0012          2         7C:1,10C:1
0013          2         7C:1,10C:1
0014          2         7C:1,10C:1
0015          2         7C:1,10C:1
0016          2         7C:1,10C:1

-----------------------------

MB Total:     12
GB Total:    0.0

AND the follwing command to get LUN ID of DEV.

symcfg -sid 17 list -dir 7c -p 1 -address -available

Symmetrix ID: ID

           Director                 Device Name          Attr     Address
    ---------------------- ----------------------------- ---- --------------
    Ident   Symbolic  Port Sym   Physical                     VBUS  TID  LUN
    ------  --------  ---- ----  -----------------------      ----  ---  ---

    FA-7C   07C       1    -          AVAILABLE                       0   00  000 *
                                          0011  /dev/sdrj                       0   00  011
                                          0012  /dev/sdrk                       0   00  012
                                          0013  /dev/sdrl                       0   00  013
                                          0014  /dev/sdrm                       0   00  014
                                          0015  /dev/sdrn                       0   00  015
                                          0016  /dev/sdro                       0   00  016

BUT Do you know any command or script can give host, dev, capacity, FA port and LUN in same output?

Thx.

Message was edited by: NTA12 Thx a lot for sharing your script it's working fine.