Unsolved
This post is more than 5 years old
2 Intern
•
614 Posts
0
612
June 27th, 2011 13:00
Log disk BCV taking long time to synchronize
Hello,
Lately our sync/split operation has been taking longer than usual. The BCV in question is the log disk. It is taking longer than normal to synchronize and has added almost 5 hours to our process. Our process has not changed, no new disks were added to the BCVs and we have not made any changes whatsoever to the DMX-3. The only thing we found out was that the dbas added 300 gb to the production database used in the split operation. Any thoughts on why this might be happening? We use the incremental process and not the full force.
Thank you!
admingirl
0 events found
No Events found!
vijay861
51 Posts
0
June 27th, 2011 13:00
Using Split operation, Increases the amount of Data to be Synchronize.
From Split to Sync it will take longer than Usual, if there is more data to be Synchronized.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
June 27th, 2011 13:00
have you noticed if there a lot more changes that BCV has to sync ?
admingirl
2 Intern
•
614 Posts
0
June 27th, 2011 13:00
I am not sure, pardon my newbieness, but how would I check that? I usually just query the diskgroup.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
June 27th, 2011 13:00
query the disk group just right after it started syncing, add -i 5 parameter so you can watch the number of megabytes to be copied over.