Unsolved
This post is more than 5 years old
1 Rookie
•
75 Posts
0
14502
June 5th, 2015 16:00
IDrac 7 Login
Hi
I am trying to login to iDrac 7 using htps:// I have tried both the root/calvin and domain\user logins but without success. What are my options from here? How can I set-up user/password?
Thanks
Regards
No Events found!
DELL-Shine K
4 Operator
•
3K Posts
1
June 5th, 2015 21:00
If you have OMSA installed on the server, you can run the below command to set the iDRAC Root user password.
racadm set idrac.users.2.password calvin
Above command will work only if your iDRAC FW is 1.30.30 and above. You can run below command if above command is not supported by the firmware
racadm config -g cfgUserAdmin -i 2 -o cfgUserAdminPassword calvin
You can also set the root password from iDRAC Setting Utility during boot. For this you can reboot the server and go to iDRAC Settings by pressing F2 during reboot. In iDRAC Settings page you will get an option to reset root user password