VxRail 120 F problem with first node

Question

I have one Vxrail 120F with 4 node Quanta running latest software 4.5.152 First Node is keeping to disconnected with no response after restart with 1 hour or less when i try to see what happen through BMC console i found it freezed so i restart every thisng is return to normal but after few minutes not responding and freezing again after some restart it freeze on Bios and not boot to ESXi i got this error from BMC log Warning QPI Error Processor Correctable Error / QPI Error Code : Rx detected CRC error: successful LLR (no Phy re-init) / CPU 1 / QPI Port 0 - Asserted finally  it keep restarted automatic and boot with esxi and return to not responding again

giadarola · Answer

You need to open an SR with support.

Muki1 · Answer

Has anyone had any issues with 4.5.152 spectre Update? I see you have applied 4.5.152 spectre patch. We are applying this on Monday.

emadfayed · Answer

i don't have a problem with update but i think it is hardware issueby the way there is a new one 4.5.210 released @ 10 May 2018&#xa0;

VxRail

Was this post helpful?