Hello All,

we are setting up our new VxRail G- Series 4.0 with 2 DellEMC S3124 ToR swicthes connected to customer Cisco 2950 series switches uplink. We couldn't reach the VxRail initial ip (192.168.10.200) for setup. we followed the Network physical and logical planning guide.

But one thing we couldn't achieve is to enable IPv6 MLD snooping/and MLD querrier on the VxRail connected ports on DellEMC S3124 switches. The command for enabling MLD snooping was not accpeted on the S3124 switches

Could this be the reason why we couldn't reach the 192.168.10.200? Below is the screenshot of the IP address the esxi hosts are receiving:

Also, VxRail selected VMNIC0 as the management NIC port.

Native VLAN was not used for the management vlan but a specified vlan

Management and VM -Network VLANs were customized  (tagged) on each esxi hosts

Still we can't reach the VxRail.

Kindly help on this.