Search Results (4.9M)
Conversation Type :
All
Published Date :
Lifetime
Community Accepted Solution
Official Solution
We have recently purchased 6 Vostro desktops in our office with Windows 10 (64) Home, Core i3 9100 CPU 3.6 GHz, with 4 GB ram. Every time after booting up, they all have 100 percent disk usage for about 30 minutes. PCs lag this entire time. This happened even before installing the necessary software
Question
•
Vostro Desktops
Community Accepted Solution
Official Solution
i hi sir my name is Ali Husnain I lost my laptop yesterday I need to recovering my laptop my laptop Model No : Latitude 5520 And ST no ***private info removed*** Please give me response
Question
•
Customer Care
Community Accepted Solution
Official Solution
Hello all, I have installed the SCG application and added a few PowerEdge iDRACs. Also I have installed ISM agents on the servers. The devices are shown as connected and their monitoring is enabled in SCG. So they seem to be fine. Now I need to ensure if the automatic case creation works as expecte
Question
•
Secure Connect Gateway
Community Accepted Solution
Official Solution
Hi, We have on a customer some switchs Dell S3124F-01-FE-28 (version 9.13(0.3). It's connected with Cisco switchs where I see outbound drop. But on the dell Switchs, I don't see discarded packets on output interface but in the input interfaces: Input Statistics: 4955893560 pac
Question
•
Networking General
Community Accepted Solution
Official Solution
Which Anti-virus program works the best for your Inspiron Laptop and why? For more questions regarding this contests, please visit the Contest Information Page here.
Question
•
Inspiron
Community Accepted Solution
Official Solution
Hello, I am having an issue with our primary server's RAID configuration. This is a Windows 2022 Server that I setup a few years back, and I thought I set it up as a RAID-1 mirror with 2 physical hard drives. I had not checked the RAID logs in the last 2 years due to some health issues; but I am cur
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Looking for the PCIE retention clips for Dell R740. They seem to fall out and get lost easily, and I'd like to see if there's a part number for them and where/how to order them. Thank you!
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
We have an R660 with an S160 controller installed and the drives are in a RAID volume Is it possible to have visability of the S160 software controller and the drives in the RAID on the iDRAC web interface? iSM is installed and Dell-VMware ESXi There are no hardware issues here just asking to see
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Request for Unlocking Quotes for BIH During the preparation of our tender dossier, we have encountered a situation where information has been leaked. To ensure transparency and fairness in the bidding process, BIH requests that Dell unlock all Purchase Orders (POs) listed under the name EU as BIH.
Question
•
Rack Servers
Community Accepted Solution
Official Solution
I have an Optiplex 7060 SFF (mini tower) with the BIOS udated at 1.14. I had to check for the RAM model so I opened the cover/tower, and upon the next boot, the BIOS did not reported that the cover has been opened during POST, as I was expecting it. The feature is enabled is the BIOS and it was
Question
•
Optiplex Desktops
Community Accepted Solution
Official Solution
Hi, After putting the wrong config regarding SSL certificate now the apache subsystem will not start. In the logs it says:"There was a problem veryfing the Apache config: AH00526: Syntax error on line 1 of /usr/local/etc/apache24/Inclues/ssl-hostnames.conf"I am connected to my SC through USB<-&g
Question
•
Compellent
Community Accepted Solution
Official Solution
Good morning, nice Dell community! The context: I have a dell boss s-1 card which is to be installed into a dell r640 server. The problem: the card has a full profile bracket. The question: do you know if it is possible to order the low profile bracket for the boss s-1? best regards, Dmitry
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Will Dell part# 03THTT (600W 80 Plus Platinum) power supply work in a PowerEdge R640? I have searched around online and can't find anywhere that listed the R640 on compatible models. Would greatly appreciate if anyone knows for sure.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hi, My Dell PowerEdge T320 amber light (system health indicator) is blinking since it was restarted due to power outage in our area. Other than blinking amber light, everything seems working normally. What does it mean? Is it okay to ignore since everything seems working normally? Thank yo
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hello everyone, I'd like to mirror a port of a port-channel on a 4148T switch (SW1) to int Eth1/1/3. Is it possible to configure the monitor session as follows: SW1# configure terminal SW1(config)# monitor session 1 SW1(conf-mon-local-1)# source interface ethernet 1/1/2 SW1(c
Question
•
Networking General
Community Accepted Solution
Official Solution
Resizable Bar Disabled Intel 770, Says Unsupported Device. All conditions are satisfied. GPU-Z simply says Unsupported Device. How do I Enable it?
Question
•
Alienware
Community Accepted Solution
Official Solution
Hi, I've recently bought the XPS 17 9710. It has now started to show green squiggly lines all over the screen when playing videos in windows Film & TV. But here's the strange thing, it only does this when it is in full screen, and when the mouse is left for a few seconds for the cursor and
Question
•
XPS
Community Accepted Solution
Official Solution
Was previously under version 4.4.0 of OpenManage Enterprise with the service plugin working. Went and upgraded to 4.5.0 which necessitated the disabling of all plugins. Upgrade completed successfully, but now after re-enabling the Service plugin, the "Enable Services Connectivity" is unchecked and g
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Official Solution
Closed
Hello, after a sever reboot and loss of configuration, the server lost its idrac license and doesn't even have express. I have re-registered the server under us transferred ownership. It's an older R320. Unfortunately I have nothing in digital-locker. How should I proceed? Thank you.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hello, I am trying to reset the password on a Dell PowerConnect M6220. I can login to the CMC via the https webpage but dont see how to do it from there. So I am trying to plug in a USB serial cable into the console port and reset the password via a console session using teraterm but when i
Question
•
Networking General

