disk naming issue ,showing two different names in format and powermt output

in format the emc lun pseudo name comes as emcpower0d
in powermt o/p Pseudo nameas emcpower0a

bash-3.2# echo|format
Searching for disks...done

c7t0d0: configured with capacity of 599.98GB
c7t1d0: configured with capacity of 599.98GB
c7t2d0: configured with capacity of 599.98GB
c7t3d0: configured with capacity of 599.98GB
emcpower0d: configured with capacity of 599.98GB

AVAILABLE DISK SELECTIONS:
0. c0t5000CCA0258D2994d0 solaris
/scsi_vhci/disk@g5000cca0258d2994
1. c0t5000CCA025923A9Cd0 solaris
/scsi_vhci/disk@g5000cca025923a9c
2. c7t0d0
/iscsi/disk@0000iqn.1992-04.com.emc%3Acx.fcnmm123301003.b10004,0
3. c7t1d0
/iscsi/disk@0000iqn.1992-04.com.emc%3Acx.fcnmm123301003.b00002,0
4. c7t2d0
/iscsi/disk@0000iqn.1992-04.com.emc%3Acx.fcnmm123301003.a10003,0
5. c7t3d0
/iscsi/disk@0000iqn.1992-04.com.emc%3Acx.fcnmm123301003.a00001,0
6. emcpower0d
/pseudo/emcp@0
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2# powermt display dev=all
Pseudo name= emcpower0a
CLARiiON ID=FCNMM123301003 [tnpmsun4.persistent.co.in]
Logical device ID=6006016002053200401C39F6320DE211 [tnpmsun04_vol]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
Host
- Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
4608 iscsi c7t2d0s0 SP A1 active alive 0 0
4608 iscsi c7t3d0s0 SP A0 active alive 0 0
4608 iscsi c7t1d0s0 SP B0 active alive 0 0
4608 iscsi c7t0d0s0 SP B1 active alive 0 0

is their any issues or can i ignore it???
else is tehir any way to make both names common?

Thanks