Hello,

I'm trying to setup a basic thing, but i couldn't find a way to do it.

I have 2 networks (VLAN 1 = 10.51.0.0/16 and VLAN 10 = 10.70.10.0/24)

A firewall is set on VLAN 1 with interface 10.51.1.1

The switch has two ip addresses (10.51.1.102 on vlan 1 and 10.70.10.1 on vlan 10)

I'm trying to route everything throught firewall (eg : trafic from vlan 10 to vlan 1).

I added a default route 0.0.0.0/0 to 10.51.1.1 on the switch

But when I ping from vlan 10 to vlan 1, the trafic is not going throught firewall and it bypass it.

This is the same if I delete the ip address on the vlan 1.

Can someone help me with that ?

The firewall isn't connected to vlan 10

Thanks

Best regards,

Romain