UNSOLVED
Access_Violations
After a lightning hit it was necessary to replace my M.B.
Dim3000 3ghz ht turned off. 512mb memory.
Things are generally working but some of my applications abend with access_violation.
I am fairly sure this is not specific to an application. To give one example, when I run STOMP Back Up, I get a access_violation in smew0002.dll. I then proceed to get an access_violation in Dr Watson. This is consistent and reproduceable.
Before replacement of the mother board I ran the back up nightly with no problems.
I have stepped into the Dell diagnostic partition and run the express diagnostics twice with no failures.
If I run in safe mode, seems I run a little longer but same problem occurs shortly after beginning to physically write the backup.
Going into my msconfig and eliminating the startup list makes no difference and I have scanned for virus's w/o success.
Trying to search the Dell knowledge base results in error 500 Server Processing Error, but I am skeptical there would be much in there.
Dr Watson event looks something like:
Faulting application DRWTSN32.EXE, version 5.1.2600.0, faulting module DBGHELP.DLL, version 5.1.2600.2180, fault address 0x0001295d.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 44 52 57 ure DRW
0018: 54 53 4e 33 32 2e 45 58 TSN32.EX
0020: 45 20 35 2e 31 2e 32 36 E 5.1.26
0028: 30 30 2e 30 20 69 6e 20 00.0 in
0030: 44 42 47 48 45 4c 50 2e DBGHELP.
0038: 44 4c 4c 20 35 2e 31 2e DLL 5.1.
0040: 32 36 30 30 2e 32 31 38 2600.218
0048: 30 20 61 74 20 6f 66 66 0 at off
0050: 73 65 74 20 30 30 30 31 set 0001
0058: 32 39 35 64 295d
I am at a loss what else to try ?
Thanks, Howard
Dim3000 3ghz ht turned off. 512mb memory.
Things are generally working but some of my applications abend with access_violation.
I am fairly sure this is not specific to an application. To give one example, when I run STOMP Back Up, I get a access_violation in smew0002.dll. I then proceed to get an access_violation in Dr Watson. This is consistent and reproduceable.
Before replacement of the mother board I ran the back up nightly with no problems.
I have stepped into the Dell diagnostic partition and run the express diagnostics twice with no failures.
If I run in safe mode, seems I run a little longer but same problem occurs shortly after beginning to physically write the backup.
Going into my msconfig and eliminating the startup list makes no difference and I have scanned for virus's w/o success.
Trying to search the Dell knowledge base results in error 500 Server Processing Error, but I am skeptical there would be much in there.
Dr Watson event looks something like:
Faulting application DRWTSN32.EXE, version 5.1.2600.0, faulting module DBGHELP.DLL, version 5.1.2600.2180, fault address 0x0001295d.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 44 52 57 ure DRW
0018: 54 53 4e 33 32 2e 45 58 TSN32.EX
0020: 45 20 35 2e 31 2e 32 36 E 5.1.26
0028: 30 30 2e 30 20 69 6e 20 00.0 in
0030: 44 42 47 48 45 4c 50 2e DBGHELP.
0038: 44 4c 4c 20 35 2e 31 2e DLL 5.1.
0040: 32 36 30 30 2e 32 31 38 2600.218
0048: 30 20 61 74 20 6f 66 66 0 at off
0050: 73 65 74 20 30 30 30 31 set 0001
0058: 32 39 35 64 295d
I am at a loss what else to try ?
Thanks, Howard
