Dell EMC Networking S-Series 10GbE switches
Tech Specs & Customization
Chassis
S4048-ON, S4048T-ON, S4128F-ON, S4148F-ON, S4128T-ON, S4148T-ON, S4148FE, S4148U, S4248FB-ON, S4248FBL-ON:
1RU Fixed ports
S4148U:
The S4148U enables converging LAN and SAN traffic in a single 1U ToR switch supporting FC8, FC16 and FC32 connectivity.
S4112F-ON, S4112T-ON:
1RU, half-width fixed ports
Other Switching
Open Networking
S4248FB-ON and S4248FBL have deep buffers
S4248FBL has larger tables
Performance
S4112F-ON/S4112T-ON: 630Mpps
S4128F-ON/S4128T-ON/S4248FB-ON/S4248FBL-ON: 720Mpps
S4148F-ON/S4148T-ON/S4148FE-ON/S4148U-ON: 1320Mpps
S4048-ON and S4048T-ON: 1080Mpps
Port Attributes
S4048-ON:
48x10GbE
6x40GbE
S4048T-ON:
48x10GBase-T
6x40GbE
S4112F-ON:
12x10GbE
3x100GbE
S4112T-ON:
12x10GBase-T
3x100GbE
S4128F-ON:
28x10GbE
2x10/25/40/50/100GbE
S4148F-ON:
48x10G
4x10/25/40/50/100GbE
S4128T-ON:
28x10GBase-T
2x10/25/40/50/100GbE
S4148T-ON:
48x10GBase-T
4x10/25/40/50/100GbE
S4148FE:
48x10GbE
2x40GbE
4x10/25/40/50/100GbE
S4148U:
24x10GbE
24x10GbE or FC8/16
2x40GbE
4x10/25/40/50/100GbE or FC8/16/32
S4248FB-ON and S4248FBL-ON:
40x10GbE
2x40GbE
6x100GbE
Emissions/Safety
Safety:
UL/CSA 60950-L Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition Including all National Deviations and Group Differences, EN 60825-1 Safety of Laser Products Part1: Equipment Classification Requirements and User’s Guide, EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fibre Communications Systems, FDA Regulation 21 CFR 1040.10 and 1040.11
Emissions:
Australia/New Zealand: ASNZS CISPR 22: 2006,m Class A, Canada: ICES-003, Issue-4, Class A, Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A, Japan: VCCI V3/2009 Class A
Environmental Operating Conditions
Operating temperature: 32°F to 113°F (0°C to 45°C)
Operating humidity: 10 to 85% (RH), non-condensing
Immunity
EN300 386 V1.4.1:2008 EMC for Network Equipment, EN 55024: 1988 + A1: 2001 + A2: 2003, EN 61000-3-2: Harmonic Current Emissions, EN 61000-3-3: Voltage Fluctuations and Flicker, EN61000-4-2: ESD, EN 61000-4-3: Radiated Immunity, EN 61000-4-4: EFT, EN 61000-4-5: Surge, EN 61000-4-6: Low Frequency Conducted Immunity
Management
CLI
SNMP
REST API’s
Multicast
Yes
Power
100 - 240 VAC 50/60 Hz
Quality of Service
Yes
Regulatory
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment
RoHS
All S Series components are EU RoHS compliant
Routing
Full L2/L3 switching and routing
Standards Supported
IEEE – 802.1, 802.3
RFC – IP, IPv4, IPv6, RIP, OSPF, IS-IS, BGP,
Multicast, Security, Data Center Bridging,
Network Management
VLAN
VLAN Tagging, Double VLAN Tagging, GVRP
Security
Yes
Features
Flexible, powerful 10GbE ToR switches for data centers of all sizes
Deploy modern workloads and applications designed for the open networking era with an optimized data center top-of-rack (ToR) networking solution that:
- Includes the 10GbE S4000-ON Series and S4100-ON Series switches,1/10G BASE-T S4048T-ON, S4128T-ON and S4148T-ON switches, and 10GbE S4148FE, S4248FB-ON, and S4248FLB-ON switch
- Delivers low latency, superb performance and high density with hardware and software redundancy
- Offers Active Fabric designs using S- or Z-Series core switches to create a two-tier 1/20/40/100GbE data center network architecture
- The S4148U-ON has Fibre Channel ports for connections to Storage Area Networks
- Provides an ideal solution for applications in high-performance data center and computing environments
Optimized for the open networking era
Get more agility, more choices and lower costs than proprietary networks with select, open-standards-based ON (open networking) switches.
- Disaggregated-hardware/software solutions bring new levels of freedom and flexibility to your data center.
- Support for Open Network Install Environment (ONIE) enables zero-touch installation of alternate network operating systems.
- Your choice of network operating system helps simplify data-center fabric orchestration and automation.
- A broad ecosystem of open-source and Linux-based applications and tools provides more options to optimize and manage your network.
Developed for flexibility
The Dell EMC Networking S-Series 10/40GbE switches offer a family of products that enable you to find the ideal solution for your specific needs.
- Line-rate performance from 1/10G BASE-T to 40GbE and port densities from 28 to 48
- Efficient stacking offered in many S-Series models
- Industry-hardened and feature-rich operating system for maximum dependability and uptime with select third-party OS options
- Full support for iSCSI storage area networks, including DCB
Dell EMC Networking S4048-ON
Optimize your network for virtualization with a high-density, ultra-low-latency ToR switch that features 48 x 10GbE SFP+ and 6 x 40GbE ports (or 72 x 10GbE ports in breakout mode) and up to 720Gbps performance. The S4048-ON also supports Open Network Install Environment (ONIE) for zero-touch installation of alternate network operating systems.
Dell EMC Networking S4112F-ON
Optimize your hyper-converged and software-defined-storage environments with a low density, high-performance 1RU, half-width switch that features 12 x 10GbE ports and 3 x 100GbE ports (or 12 x 10GbE and 12 x 25GbE ports in breakout mode), and ONIE for zero-touch installation of alternate operating systems.
Dell EMC Networking S4112T-ON
Optimize your hyper-converged and software-defined-storage environments with a low density, high-performance 1RU, half-width switch that features 12 x 10GBase-T ports and 3 x 100GbE ports (or 12 x 10GBase-T and 12 x 25GbE ports in breakout mode), and ONIE for zero-touch installation of alternate operating systems.
Dell EMC Networking S4128T-ON
Achieve performance and value for 10 GbE copper terminations to servers and storage devices with this ToR switch, which supports 28 x 10GBase-T ports, 2 x 40GbE QSFP+ ports, 2 x 100GbE QFSP28 ports, and ONIE for zero-touch installation of alternate network operating systems.
Dell EMC Networking S4148T-ON
Achieve maximum density and value for 10 GbE copper terminations to servers and storage devices with this ToR switch, which supports 48 x 10GBase-T ports, 2 x 40GbE QFSP+ ports, 4 x 100GbE QFSP28 ports, and ONIE for zero-touch installation of alternate network operating systems.
Dell EMC Networking S4148U
Maximize performance, flexibility and cost-effectiveness with this multi-functional ToR switch that features 24 x 10GbE SFP+ ports, 24 x unified SFP+/SFP28 ports (1/10GbE or FC8/16), 2 x 40GbE QSFP+ ports, and 4 x unified QSFP28 ports (10/25/40/50/100GbE or FC8/16/32). In 1RU, provides the ability to offer converged LAN/SAN connections in the data center.
Dell EMC Networking S4248FB-ON
The latest generation S-Series multi-purpose 10/40/100GbE switch with deep buffers for optimum performance and connectivity, featuring 40 x 10GbE SFP+ ports + 2 x 40GbE QFSP+ ports + 6 x 100GbE QSFP28 ports. The S4200-ON also supports Open Network Install Environment (ONIE) for zero-touch installation of network operating systems.
Dell EMC Networking S4248FBL-ON
The latest generation S-Series multi-purpose 10/40/100GbE switch with an option for deep buffers and large tables for optimum performance and low cost WAN and SDN connectivity, featuring 40 x 10GbE SFP+ ports + 2 x 40GbE QFSP+ ports + 6 x 100GbE QSFP28 ports. The S4200-ON also supports Open Network Install Environment (ONIE) for zero-touch installation of network operating systems.
Solutions & Services
Navigate network complexity with Dell EMC Services
Our global team of network experts understands the complexities of IT ecosystems, including multi-vendor environments. We have the skillset and experience to not only quickly resolve performance issues but also transform your network to meet the demands of your business.
Consulting
Dell EMC network consultants provide expert guidance to help you optimize and transform the network environment for the demands of today’s multi-cloud infrastructures. Our deep infrastructure and application expertise combined with sophisticated network analysis toolsets address a wide range of network technology and process challenges.
Deployment
Leverage the Dell EMC ProDeploy Enterprise Suite to get your network installed and configured. Our experts can free your IT staff to focus on your core business, minimize downtime and give you the confidence that the job will be done right, the first time.
Support
Gain access to ProSupport technical experts who can assist with your most complex networking challenges. The Dell EMC ProSupport Enterprise Suite provides networking support around the clock and around the globe, helping your team maintain a high level of productivity.
Education
Dell EMC offers flexible training programs so your staff can build the right skills to successfully manage and utilize your network to its full potential. Through our personalized approach, your staff gets the exact training they need to improve productivity and adoption, decrease downtime, and reduce end-user support calls.
Compare Products (0)
Add the products you would like to compare, and quickly determine which is best for your needs.
