How to Load Envelopes on the E525W Dell Laser Printer

NOTE: When you print on envelopes, be sure to specify the envelope setting on the printer driver. If not specified, the print image will be rotated 180 degrees.

NOTE: If you do not load envelopes in the standard 150 sheet tray right after they have been removed from the packaging, they may bulge. To avoid jams, flatten the envelopes before loading. And then, firmly press down on the entire surface of the envelopes as shown below.

When Loading Envelopes #10, DL, or Monarch

Load envelopes with the flaps closed. Place the print side facing up, and the flaps come at the right when you face towards the printer.

Once you insert envelopes in the printer if you are prompted to change paper type and size then please do so. If this is not done you will get a paper mismatch error.

Change the follow settings in the driver.

Also need to make sure this is set also. If not it will print backwards and upside down.

From there confirm your word settings to look like this.

It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.