PowerConnect M8024, Firmware Version 5.1.3.7,A32

Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
To view all drivers for your PowerConnect M8024, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

PCM8024v5.1.3.7a32.zip | 11.91 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Download Go to Latest Version
Show details | Download current version instead | View other downloadable formats
File Format: Extracts files directly to local disk
File Name: PCM8024v5.1.3.7a32.zip
File Size: 11.91 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
53d3a1ff6914f8bef36ff0269ce3d040
SHA1:
631c298e4eb8d7fd044bc7f4fa514c55a39c037a
SHA-256:
2736df7a6127c7a0e8f35ee453d5d01e6edb528e9d7fc6a96bc876d378981d57

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Release 5.1.3.7 contains fixes for the following issues:

622897 PC8024 - SNMP Product Status OID does not change after a fan/power failure
660307 PC6248P - No Receive Discards counter available
674190 PC8100 - Stack member unit crash with task "hapiMcAsyncTask"
679802 PC7024 - Software routing when using secondary SVI
680596 SNMP OID not incrementing snmpEngineBoots value
687093 nimTask crash on PC8024 stack while routing traffic with OSPF enabled
690946 4x M8024-k switches, one intermittently doesn't join a stack after reboot from CLI
705979 dot1sBpduReceive(): Discarding the BPDU, cannot get buffer from buff pool
707212 8100 stack member reboots with task bcmRPC. Firmware 5.1.1.7
708516 PC81xx - IPMapForwardingTask and Interrupt Thread crashing switch 5.1.1.7
709801 M8024k - Error with temperature status reporting
712702 Using WebUI to set fields Dynamic VLAN creation and GVRP Registration issue
713435 OpenSSH Vulnerability Issue - Fix for: CVE-2012-0814
716307 crashdump - (null) XXXXX - possibly SSH related
722543 After failover vlan is getting associated with physical interface.
722543 After failover the spanning-tree status of the physical interface is transitioned from discarding to forwarding.
726597 Source MAC address from LLDP frames learned in bridge address table
728001 PC8100 - WebUI showing medium temp, while the CLI was showing good temp.
734385 MIB Walk on M6348 and M8024-K running latest firmware not returning the same results (5.1.2.3)
735710 PC81xx - Switch crash when VRRP configuration applied.
749137 IPv6 PIM Multicast traffic stops working with MFC-V6 error messages
Read More

Version

5.1.3.7, A32

Release date

14 Feb 2014

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
View Important Information
File Format: A text file containing customer friendly fixes and enhancements information
File Name: PCM8024ReadMev5.1.3.7a32.txt
File Size: 3.15 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
2aabac7f54ca5488e66ead226836e0d4
SHA1:
361c71a0df12066ef0170e892b82d00712083548
SHA-256:
fff748481d042eb7c138443ffeed495868096fe221e38b4350d4df95fbec04cf

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".

Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
5.1.18.1, A4810 May 2022
5.1.17.1, A4713 Jul 2021
5.1.16.1, A4624 Jan 2020
5.1.15.2, A4528 Jun 2019
5.1.14.1, A4418 Dec 2018
5.1.13.1, A4302 Jul 2018
5.1.12.2, A4201 Dec 2017
5.1.11.1, A4110 May 2017
5.1.10.1, A4028 Apr 2016
5.1.9.4, A3911 Dec 2015
5.1.9.3, A3811 Sep 2015
5.1.8.2, A3715 Apr 2015
5.1.7.5, A3627 Jan 2015
5.1.6.3, A3520 Oct 2014
5.1.5.1, A3424 Jul 2014
5.1.4.5, A3303 May 2014
5.1.2.3, A3107 Nov 2013
v5.1.1.7, A3030 Jul 2013
v5.1.0.1, A2903 Apr 2013
v5.0.0.4, A2729 Aug 2012
v4.2.2.3, A2611 May 2012
4.2.1.3, A2530 Jan 2012
4.2.0.4, A2406 Dec 2011
(1) Download the zip file - PCM8024v5.1.3.7a32.zip
(2) Extract the image file "PCM8024v5.1.3.7.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf" extracted from zip file.

Need help with network connection issues?

Find a solution in Dell's network troubleshooting and usage guide.

Drivers help and tutorials