Dell Inspiron 3891 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : 25KNJ

Importance : Critical

Version : 1.21.1, 1.21.1 Latest version Recommended version Latest and Recommended version

Release Date : 13 Dec 2023

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Inspiron_3891_1.21.1.exe

File size: 22.69 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 22d673e48c6655c9525561d6dbde7b4d

SHA1: 06a186a4a3d85a82efaca3da41337a61adc8f775

SHA-256: f911bb5b7f2e93fa05bc20d6708f107db5d04301cb85603d62fac862e9b95d85

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 22.68 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 7da914a2c4b4c01a80e26ad2f6df07b8

SHA1: e870ad160e8995d2c2425f9089401a6c28989b20

SHA-256: 97a984b77a36733db8ea2844659bb280a8786fb3324629e454f94982ed2262ca

Download .RCV

Fixes & Enhancements

- This release contains security updates as disclosed in the Dell Security Advisory DSA-2023-359. For more information, see Dell Security Advisories and Notices.
- Fixed the issue where the BIOS admin password cannot be set if Dell Encryption PBA is active.
- Fixed the issue where the system can boot on the bootable key when the BIOS admin password is set.
- Fixed the issue where the system stops responding during Power-On Self-Test (POST). This issue occurs when the NVMe or Trusted Platform Module firmware is interrupted while updating the firmware.
- Fixed the issue where the Admin Unlock window in the BIOS setup stops responding or the system reboots automatically. This issue occurs when you enter the wrong Master Password in the system password prompt by pressing CTRL+Enter.

Important Information

- Once the BIOS is upgraded, you cannot downgrade the BIOS to version 1.13.90 or earlier. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell Inspiron 3891 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to