PowerConnect,M8024-K,v5.1.0.1,A10
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
To view all drivers for your PowerEdge M1000E, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
PCM8024kReadMev5.1.0.1a10.txt | 3.15 KB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
A text file containing customer friendly fixes and enhancements information
File Name:
PCM8024kReadMev5.1.0.1a10.txt
File Size:
3.15 KB
Format Description
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
55cfd65364bdc9622b3d903156c428ae
SHA1:
8878cce74b75f3e8f8fbfcd19f820b772813feaa
SHA-256:
8f97f0d8d45918227da98f22f5d84bdc1436f3120fe92080fa8147b046c269cb
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes and Enhancements:
Fixes
- M6220 crashes when issuing command "show interfaces switchport po1"
- Cannot apply ACL on VLAN out bound direction from GUI
- Default VLAN cannot be made static from GUI
- Incorrect SFP interface log messages on stack
- SNMP management IP address can only be set from WebUI and lost after reboot.
- Simple mode In-band IP address missing after reboot.
- ARP entries are purged for unknown reason
- OOB Static IP unreachable after stack failover
- http[s] authentication against RADIUS only allows privilege level 1 access
- SNMP v1/2 community manager address no longer functions with network address.
- Switch service tag not displayed by show system id command
- CLI commands are not authorized after Password Recovery
- LINK UP on all interfaces during POST
- FCoE -M8024-k setting TSA map to link strict and assigning bandwidth allocation to TC
- Switch GUI forcing 100Mb speed on External ports when cloning port configurations
- PowerConnect M6348/General port GUI issue
- M6348 - service tag not displayed in GUI
- email addresses with underscore "_" are rejected
- phone port configuration macro incomplete
Enhancements
- IGMP Snooping Improvements
- IP Multicast Enhancements
- Support for B1 CPU - only on 8100 series
- New Browser Support
> Mozilla Firefox 14
> Internet Explorer 9
> Google Chrome 21
- Static Route Maximum Increased to 512 (for all switches except for M6220 series)
- USB Auto-configuration expanded for multiple MAC Address support
- Ability to reset stack port counters
- Increased Maximum number of dot1x clients per port to 24
- Commands to remove signed certificates/Keys
- Support for Additional transceivers/optics
Read More
Fixes
- M6220 crashes when issuing command "show interfaces switchport po1"
- Cannot apply ACL on VLAN out bound direction from GUI
- Default VLAN cannot be made static from GUI
- Incorrect SFP interface log messages on stack
- SNMP management IP address can only be set from WebUI and lost after reboot.
- Simple mode In-band IP address missing after reboot.
- ARP entries are purged for unknown reason
- OOB Static IP unreachable after stack failover
- http[s] authentication against RADIUS only allows privilege level 1 access
- SNMP v1/2 community manager address no longer functions with network address.
- Switch service tag not displayed by show system id command
- CLI commands are not authorized after Password Recovery
- LINK UP on all interfaces during POST
- FCoE -M8024-k setting TSA map to link strict and assigning bandwidth allocation to TC
- Switch GUI forcing 100Mb speed on External ports when cloning port configurations
- PowerConnect M6348/General port GUI issue
- M6348 - service tag not displayed in GUI
- email addresses with underscore "_" are rejected
- phone port configuration macro incomplete
Enhancements
- IGMP Snooping Improvements
- IP Multicast Enhancements
- Support for B1 CPU - only on 8100 series
- New Browser Support
> Mozilla Firefox 14
> Internet Explorer 9
> Google Chrome 21
- Static Route Maximum Increased to 512 (for all switches except for M6220 series)
- USB Auto-configuration expanded for multiple MAC Address support
- Ability to reset stack port counters
- Increased Maximum number of dot1x clients per port to 24
- Commands to remove signed certificates/Keys
- Support for Additional transceivers/optics
Version
v5.1.0.1, A10
Release date
03 Apr 2013
Download Type
Firmware
Category
Network, Ethernet & Wireless
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
View Important Information
File Format:
Extracts files directly to local disk
File Name:
PCM8024kv5.1.0.1a10.zip
File Size:
12.1 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
395d18bc42362a8149cae5ccd25db6b1
SHA1:
179066be302e843ec5171f4b1fa0ee498b9882a7
SHA-256:
3ea3d2b588d1af2fc5f9958cad03e05e7cfa173cbce4cb79885dbc998afa7d45
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.0.x.x to 5.1.0.1 Firmware.pdf".
Other Available Versions
5.1.14.1, A2518 Dec 2018
5.1.13.1, A2402 Jul 2018
5.1.12.2, A2301 Dec 2017
5.1.9.3, A1911 Sep 2015
5.1.8.2, A1815 Apr 2015
5.1.7.5, A1727 Jan 2015
5.1.6.3, A1617 Oct 2014
5.1.5.1, A1524 Jul 2014
5.1.4.5, A1405 May 2014
5.1.3.7, A1314 Feb 2014
5.1.2.3, A1207 Nov 2013
5.1.1.7, A1130 Jul 2013
v5.0.1.3, A0920 Nov 2012
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Applies to
PowerConnect M8024-K
Installation instructions
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.0.x.x to 5.1.0.1 Firmware.pdf".
Reboot will be required
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.