Dell Inspiron 3493/3593/3793/5493/5593 and Vostro 3491/3591 System BIOS

- Once the BIOS is upgraded, you cannot downgrade BIOS EXE/Recovery (RCV) to versions earlier than 1.10.1, due to restrictions. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system. - BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Updating the BIOS from Windows Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again. Updating the BIOS from BIOS Boot Menu (independent of operating system) Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Installation 1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive. 2. Insert the USB drive into any USB port. 3. Power on the system. 4. At the DELL logo screen, press F12 to access the one-time boot menu. 5. Select BIOS Flash Update in the Other Options section. 6. Click the ... button to browse the USB drive to locate the downloaded file. 7. Select the file and click OK. 8. Verify the existing system BIOS information and the BIOS update information. 9. Click Begin Flash Update. 10. Review the Warning message and click Yes to proceed with the update. The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete. Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled) Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed. Installation 1. Copy the downloaded file to a bootable DOS USB drive. 2. Power on the system and then go to BIOS Setup by pressing the F2 key. 3. Go to General > Boot Sequence > Boot > Boot List Option. 4. Change UEFI to Legacy of Boot List Option. 5. Go to Exit > Save Changes and reboot system. 6. Press F12 and then select USB Storage Device and boot to the DOS prompt. 7. Run the file by typing the file name. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again. 8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option. 9. Change Legacy to UEFI Boot Option. 10. Go to Exit > Save Changes and reboot the system.