Dell SAS 5/i Integrated, v.00.10.51.00.06.12.05.00, A03
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Dell PowerEdge SAS5I integrated Firmware
To view all drivers for your PowerEdge 2970, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
FRMW_LX_R168477.BIN | 1.52 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Update Package for Red Hat Linux
File Name:
FRMW_LX_R168477.BIN
File Size:
1.52 MB
Format Description
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
F38D04A1B6772E7B88F288FE2A87B6C8
SHA1:
Not available
SHA-256:
Not available
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes/Enhancements
===================
1. Fixed an issue that causes errors during cable disconnect scenarios when connected to a Dell MD3000 enclosure
2. Addressed an issue where interrupt warnings were seen during Operating system installations
3. Fixed an issue with rebuild progress reporting in an OS environment
4. Improved Tape performance on SAS 5/E with External SAS Tape Units
5. Disabled option in BIOS to change the "report device missing delay" which could potentially cause timing related issues and performance related issues with attached devices when toggled
6. Modified release script for SAS 5 cards so that it is compatible with other 6th Generation SAS controllers
7. Modified the SAS5 Option ROM to improve CHS (Cylinder/Head/Sector) to LBA (Logical Block Address) translation, to add support for newer disk partition utilities
Read More
===================
1. Fixed an issue that causes errors during cable disconnect scenarios when connected to a Dell MD3000 enclosure
2. Addressed an issue where interrupt warnings were seen during Operating system installations
3. Fixed an issue with rebuild progress reporting in an OS environment
4. Improved Tape performance on SAS 5/E with External SAS Tape Units
5. Disabled option in BIOS to change the "report device missing delay" which could potentially cause timing related issues and performance related issues with attached devices when toggled
6. Modified release script for SAS 5 cards so that it is compatible with other 6th Generation SAS controllers
7. Modified the SAS5 Option ROM to improve CHS (Cylinder/Head/Sector) to LBA (Logical Block Address) translation, to add support for newer disk partition utilities
Version
00.10.51.00.06.12.05.00, A03
Release date
20 Nov 2007
Download Type
Firmware
Category
SAS Non-RAID
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
View Important Information
File Format:
One or more self extracting disk images inside of a self extracting zip
File Name:
BR168477.exe
File Size:
929.98 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f800430faf59333296da9ab98f039a55
SHA1:
Not available
SHA-256:
Not available
File Format:
A GnuPG file which contains a cryptographic signature
File Name:
FRMW_LX_R168477.BIN.sign
File Size:
194 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
C21B1493F437361716EAABB4C6E22BEF
SHA1:
Not available
SHA-256:
Not available
File Format:
ZipPack External
File Name:
R168477.EXE
File Size:
709.39 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
File Format:
External release notes
File Name:
SAS5ii_external_R168477_A03.txt
File Size:
6.46 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
70ac24095d78eb7d30faaa45042fc3c8
SHA1:
Not available
SHA-256:
Not available
File Format:
Update Package for MS Windows 32-Bit
File Name:
FRMW_WIN_R168477.EXE
File Size:
1.87 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
5A9CC46C728E99019804F36146D8120C
SHA1:
Not available
SHA-256:
Not available
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
NOTE : Flashing back to the previous 6.40 firmware will cause the controller to become inoperable
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Applies to
SAS 5/i Integrated
SAS 5i/ Integrated
Installation instructions
Instructions for BR168477.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Instructions for FRMW_LX_R168477.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R168477.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./FRMW_LX_R168477.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168477.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168477.BIN.sign
Instructions for FRMW_WIN_R168477.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for R168477.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for SAS5ii_external_R168477_A03.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Instructions for FRMW_LX_R168477.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./FRMW_LX_R168477.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./FRMW_LX_R168477.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168477.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168477.BIN.sign
Instructions for FRMW_WIN_R168477.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Instructions for R168477.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for SAS5ii_external_R168477_A03.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.