Dell PowerConnect 7000 Series, Firmware Version 5.1.5.1,A18
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.5.1_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.5.1 Firmware.pdf".
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes available in this release:
CaseID Summary
755338 show running-config all CLI command is not working as expected. 749031 Switch crashes intermittently with tArpCallback & IpHelperTask task related errors 755412 M8024-k - "show system" CLI command shows blank "Power Supplies" status 764268 M8024k - emweb_main crashdump analysis required 767045 M8024k - emweb_main crashdump analysis required 769220 Question in relation to igmp snooping/flooding implementation across the range 783411 PC70xx v5.1.3.7 ip_util.c error message when default route is configured 788103 PC70xx v5.1.3.7 Global Health Status is abnormal 790319 PC70xx - 5.1.4.5 - Storm control is not working as expected 760163 PC70xx - Stack stops responding to ICMP, WebUi & Telnet 790392 5.1.4.5 - Switch stops responding to Serial console, Telnet, SSH and WebUI 782851 RADIUS "Access-Request" packet having "Stat (24)" attribute included when doing reauthetication.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.5.1_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.5.1 Firmware.pdf".
(1) Download the zip file - PC7000v5.1.5.1a18.zip (2) Extract the image file "PC7000_M6348v5.1.5.1.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.5.1 Firmware.pdf" extracted from zip file.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.