HGST EK38 for model number(s) HUC156060CS4204..
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version EK38 for HGST drives. Vendor model numbers HUC156060CS4204..
To view all drivers for your Poweredge FC630, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
SAS-Drive_Firmware_KMD1P_LN_EK38_A00.BIN | 6.06 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Update Package for Red Hat Linux
File Name:
SAS-Drive_Firmware_KMD1P_LN_EK38_A00.BIN
File Size:
6.06 MB
Format Description
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
dd73674bf6f0e7d9bce90420f2fda1b3
SHA1:
57159da23cd32416ba40e070956c6ce264475342
SHA-256:
cc99714012d4bb51c98b715a64a1676ee1b470d7c395124a18f361164c7181b3
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- Modify the HCM Full Stroke Seeks frequency and velocity to be quieter and occur at about a 1 seek per approx 1 second.
- The minimum temperature at which low power servo is enabled was increased from 25 to 30 degrees.
- Fix for factory test process show stop issue.
Enhancements
- Enable the Vendor Option to disable the reporting of the Temperature Smart Trip.
Read More
- Modify the HCM Full Stroke Seeks frequency and velocity to be quieter and occur at about a 1 seek per approx 1 second.
- The minimum temperature at which low power servo is enabled was increased from 25 to 30 degrees.
- Fix for factory test process show stop issue.
Enhancements
- Enable the Vendor Option to disable the reporting of the Temperature Smart Trip.
Version
EK38, A00
Release date
16 Jul 2018
Download Type
Firmware
Category
SAS Drive
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats
View Important Information
File Format:
A GnuPG file which contains a cryptographic signature
File Name:
SAS-Drive_Firmware_KMD1P_LN_EK38_A00.BIN.sign
File Size:
226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c487e92415675d91a613b06bb7ae01b2
SHA1:
7090eb0bff09b3c3ddee34e634ff51ff32a09f51
SHA-256:
4cd94c2eb3d2bbb1a21f54a4cb03e78eda717d051bb620fdd0a808924836a827
File Format:
Update Package for MS Windows 32-Bit
File Name:
SAS-Drive_Firmware_KMD1P_WN32_EK38_A00_01.EXE
File Size:
9.2 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c4da3e14f42cf16bc654cf558ad50036
SHA1:
9a6f09ebdbeebc27530957a8494f6a58dbe58606
SHA-256:
4bac9136a509e1c26b173962e77fd0d921c87477c7584baf8635bbf7a4dff697
File Format:
Update Package for MS Windows 64-Bit.
File Name:
SAS-Drive_Firmware_KMD1P_WN64_EK38_A00_01.EXE
File Size:
7.99 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
8c1a973a8215985eae2389827da65196
SHA1:
adda5fcf08857dec496101309ffb3df334c970c0
SHA-256:
ca5673227239a2eef1561dcbaba631438a6efdfa486af0edd30631d734b71ccd
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Windows Server 2012
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
SUSE Linux ES 12
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2008 R2
Windows Server 2016
Looking for a different OS? View the list of Dell supported operating systems
Applies to
HITACHI COBRA F 2.5 600GB 15K SAS12 4Kn
Installation instructions
1. Click the 'Download Now' link to download the file.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
2. When the File Download window appears, click 'Save' to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.