Dell Networking N3000 Series, Firmware Version 6.2.1.6,A06

Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Both Dell Networking N3000 and N2000 Series switches share the same firmware image file (N3000_N2000v6.2.1.6.stk). If your N3000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade your switch to the latest version of firmware version 6.2.1.6 as it contains multiple bug fixes and enhancements.

After upgrading the switch firmware version to 6.2.1.6, the boot code update is required on N3000 series switches via serial console if switch is running with the older boot code version. The latest boot code version available for N3000 series switches is “U-Boot SPL 2012.10-00078-g24e99ea (Jun 24 2014 - 16:41:18)"

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.1.6_Release_Notes".

Please follow firmware upgrade instructions included in the zip file - "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.1.6 Firmware"
To view all drivers for your PowerSwitch N3000 Series, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

N3000v6.2.1.6a06.zip | 22.97 MB
This is a large file. Depending on your connection speed, it may take some time to download.

File Format: Extracts files directly to local disk
File Name: N3000v6.2.1.6a06.zip
File Size: 22.97 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
a70b8d4c1ca3af3a5a6d029eeb5a0ca3
SHA1:
aabc7312dd7377c1339e8b891e0277c3d072af59
SHA-256:
ed5ecba2419134ee61d11df81cfffb142b4055de8b863040d13e3cc2d7276ead

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

New Features & Enhancements:
-Added Port-Security Sticky-MAC feature
-Added support configuration of AdvLinkMTU, and included option MTU in Router Advertisement Message
-Kernel updates and SSL version upgrade to 1.0.1.m

Fixes:
Case ID Summary
865050 - N2048P v6.1.2.4 VoIP phones assigned to wrong VLAN since the stack was upgraded to v6.1.1.7
878235 - Routing issue, null address in ARP table after VLAN manipulation
881612 - N2048 - 6.1.2.4: web timeout (HTTPS) does not depend on exce-timeout configuration
883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs
886897 - N30XX v6.1.2.4 Ports on VLAN with PVST/R-PVST disabled not learning MAC addresses after reboot
890563 - ARP resolution not happening for iSCSI traffic when iSCSI optimization is enabled
891874 - N2048 - 6.1.2.4: Switch not sending snmp trap notification for UP/DOWN status on loopback interfaces
890635 - N-Series - 6.1.2.4 - SNMP MIB Walk OID "1.3.6.1.4.1.674.10895.3000.1.2.100" returns URL http://0.0.0.0
896750 - N-Series - 6.1.2.4 - IPv6 connectivity failure after stack member failure on N4064F stack with Fluid FS
897308 - N-Series Port-Security VoIP/PC issue
903943 - N-Series - 6.2.0.5 - N3000 - Receive and transmit packets dropped > MTU counters increasing
907269 - N-Series - 6.2.0.5 - Add 1G SFP (PN# FTRJ1319P1BTL) transceiver support
813685 - UNH - IPv6 - N3000 - USGv6 Interoperability and Basic Conformance failures
873414 - UNH : Unconfigurations of MTU values using the command "no system jumbo mtu" does not take effect in the DUT, after the DUT is configured with some random mtu value in the range of 1298-9216.
913069 - UNH : OSPF neighbourship not coming up on the dauntless after stack initiate failover, with MTU configured as 1298 and OSPF interface configured with ignore-mtu.
913071 - UNH : No ICMPv6 Too Big message sent on the interface, when the packet arrived on an interfaces that has less MTU configured.
913074 - UNH : DUT must drop the packet that has multicast address whose scop field contains the reserved value 0 as per RFC4291,section 2.7(page 14), but the ipv6 mrouter table has the learned-entry.
913068 - UNH : DUT should forward the packet that has multicast address whose scop field contains the reserved value "F" as per RFC4291 of section 2.7(page 14), but the first ICMPv6 echo request packet is getting dropped
913078 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an ICMPv6 Parameter Problem messages in response to invalid packets".
913077 - UNH : In USGv6 Basic Conformance, the tests failed showing the reason "The device under test does not generate an Echo Reply to packets containing Pad1 or PadN options.".
913072 - UNH : DUT has problem in configuring and propagating IPv6 parameter as per the "v6LC.2.2.7c" test mentioned in the UNH defect
901088 - Connection fd is corrupt sometimes in bgp neighbor connection list
913061 - Flash format optionis missing on N4000 Series Bootmenu.
906510 - Route loop in leaf-spine topology after bringing down the link between Leaf-1 and spine-2
913067 - 6.2: Allow period '.' in configuration of the hostname
876886 - N4064F - 6.1.2.4: ARP entries with 0000.0000.0000 mac-address
883154 - N2048P - 6.1.2.4: Stack master unit crashing issuing some 'show' CLIs
839620 - N4032F Static IP Routing Issue.
921285 - DFE should to be turned on for 10Gb copper ports on N4000 Series.
921287 - Hotswapping different modules on N4000 Series causes the switch to crash.
921322 - OSAPI semaphores don't work when two tasks are waiting on the same semaphore.
922468 - After save and reload sticky mode functionality is not properly working.
907697 - N20xx dot1x mac based authentication,clients behind phones can't forward traffic
920185 - N3000-6.2-Front 10G ports goes down when 10G SFP extension module is removed from the slot
Read More

Version

6.2.1.6, A06

Release date

29 May 2015

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
View Important Information

File Format: A text file containing customer friendly fixes and enhancements information
File Name: N3000ReadMev6.2.1.6a06.txt
File Size: 3.17 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
MD5:
be43f1003fe94bd0e302fe214ab45be2
SHA1:
7c5f2e295482166b16b621595ac3bc2c96be6a96
SHA-256:
6592a8b217dc2c84a5ebf995daf455fcb68e91b13895c21d30adffb46e345046

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Please refer to the Release Notes for additional bug fixes and feature enhancements available in this release. "Release Notes" are included in the zip file - "Dell Networking_6.2.1.6_Release_Notes"
6.3.3.1414 Feb 2018
6.3.3.10, A3103 Nov 2017
6.3.3.9, A3013 Oct 2017
6.3.3.8, A2911 Sep 2017
6.2.6.6, A0708 Sep 2015
6.2.0.5, A0510 Mar 2015
6.1.2.4, A0414 Nov 2014
6.1.1.7, A0305 Sep 2014
6.1.0.6, A0216 Jul 2014
6.1.0.1, A0106 Jun 2014
6.0.1.3, A0028 Feb 2014
Dell N3024
Dell N3024F
Dell N3024P
Dell N3048
Dell N3048P
(1) Download the zip file - N3000v6.2.1.6a06.zip
(2) Extract the image file "N3000_N2000v6.2.1.6.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell Networking N3000_N2000 Series Switches From Version 6.x.x.x to 6.2.1.6 Firmware.pdf" extracted from zip file.

Reboot will be required

Need help with network connection issues?

Find a solution in Dell's network troubleshooting and usage guide.

Drivers help and tutorials