Dell Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is a general maintenance release utility for updating firmware for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
This is for use on PowerEdge platforms that support UEFI boot mode for SAS and SATA drive updates. Please refer to DOS firmware update utility for older platforms. Current DOS release is A46.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
This firmware release adds support: D1S6 for Western Digital SAS (10K rpm 2.5 SAS) 300GB, 600GB and 900GB Hard Drives. Dell. Vendor model numbers WD3001BKHG, WD6001BKHG and WD9001BKHG
LS08 for Seagate SAS (10K rpm 2.5 SAS) 300GB, 600GB and 900GB Hard Drives. Dell. Vendor model numbers ST300MM0006, ST600MM0006 and ST900MM0006
D1R4 for Western Digital SAS (7.2K rpm 3.5 SAS) drive models WD1001FYYG, WD2001FYYG, WD3001FYYG and WD4001FYYG
GS0A for Seagate SAS (7.2K rpm 3.5 SAS) 1TB, 2TB, 3TB, and 4TB Hard Drives. Dell. Vendor model numbers ST4000NM0023, ST3000NM0023, ST2000NM0023, and ST1000NM0023
AS08 for Seagate SAS (7.2K rpm 2.5 SAS) 500GB and 1TB Hard Drives. Dell. Vendor model numbers ST91000640SS and ST9500620S
ASFB for Seagate SAS (7.2K rpm 2.5 SAS) 1TB Hard Drive. Dell. Vendor model number ST91000642SS
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This update will not run if any of the following conditions exist 1. Any Virtual Disk that is not optimal. 2. A RAID container that is performing a Background Initialization or Consistency Check. 3. A Rebuild, Resync, or copyback function is taking place. 4. A RAID set that is Partially Degraded or in a Degraded state.
1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.