Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This firmware release is for the Dell Networking X1000 series switches and includes image file, boot code file, Release Notes, MIBs, and User Documentation.
Administrators upgrading Dell Networking X1008, X1008P, X1018, X1018P, X1026, X1026P, X1052, X1052P switches to firmware-image version 3.0.1.3 and Boot-code/PROM version 1.0.0.25 MUST follow the upgrade instructions documented in the “X10xx_X4012_CLI_Software_Upgrade_Instructions.pdf" procedure. Failure to follow the procedures described in that document when upgrading firmware may result in an inoperable switch!
The relevant X10xx series switches will automatically update CPLD to the latest version (X1018/P: Rev07/2.07, X1026/P: Rev08/2.08, X1052/P HW version 00.00.04 and later: Rev0B/2.13) on boot up if switches are running with older CPLD version. CPLD update will take at least 10 to 15 minutes to complete. Power cycling the switch during the CPLD update is likely to cause the switch to become inoperable and require the switches to be RMA’ed for factory re-installation of the firmware.
CPLD code will not be updated automatically for X1052/P HW version 00.00.03 and older switches. After upgrading X1052/P HW version 00.00.03 and older switches to firmware version to 3.0.1.3 and boot-code version to 1.0.0.25, the CPLD can be updated manually from boot-menu by pressing “Esc” button on switch boot-up (and selecting the option “[3]-CPLD Upgrade Force”). Please contact our technical support for more details and guidance.
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
1) Download the zip file "x10xx-3013.zip" 2) Extract the firmware-image file "x10xx-3013.ros" and the boot-code file "x10xx_boot-10025.rfb" from the zip file. 3) Install the image and boot-code to the switch by following the upgrade procedure "Software Upgrade Instructions (via CLI or WebUI)" extracted from zip file.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.