Dell PowerConnect 7000 Series, Firmware Version 5.1.9.3,A22
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.9.3_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware.pdf".
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: 908201 - 5.1.7.5/5.1.8.2 - Dot1x Radius authentication fails when source-ip and/or attribute changed 907264 - 5.1.2.3 - Log messages flooding "Max Response Expiry Timer for vlan" 881455 - Stack- frequent crashes on all units 913264 - PC7000 - 5.1.8.2 - Change pre-emphasis settings (0x4bb0) to support 26 AWG 3M Stacking cable 913778 - PC7000 - Management ACL Log message flooding 868271 - PC70xx v5.1.6.3 Network directed broadcast stops working after being re-enabled via GUI 939708 - M8024-5.1.8.2-syslog shows wrong port mapping when optics is inserted/removed 939744 - ip ospf and rip authentication encrypt string is showing in clear-text 927589 - IPv6 neighbor solicitation multicast not distributed to non-management stack members 859610 - ssh public key authentication doesn't work 916889 - 5.1.8.1 - M8024-K 1G+forced settings not retained in 10G port after reload in a stack 944798 - 5.1.0.1 - No console/telnet/SSH access (l7_usl_macsync error)
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Fixes: 908201 - 5.1.7.5/5.1.8.2 - Dot1x Radius authentication fails when source-ip and/or attribute changed 907264 - 5.1.2.3 - Log messages flooding "Max Response Expiry Timer for vlan" 881455 - Stack- frequent crashes on all units 913264 - PC7000 - 5.1.8.2 - Change pre-emphasis settings (0x4bb0) to support 26 AWG 3M Stacking cable 913778 - PC7000 - Management ACL Log message flooding 868271 - PC70xx v5.1.6.3 Network directed broadcast stops working after being re-enabled via GUI 939708 - M8024-5.1.8.2-syslog shows wrong port mapping when optics is inserted/removed 939744 - ip ospf and rip authentication encrypt string is showing in clear-text 927589 - IPv6 neighbor solicitation multicast not distributed to non-management stack members 859610 - ssh public key authentication doesn't work 916889 - 5.1.8.1 - M8024-K 1G+forced settings not retained in 10G port after reload in a stack 944798 - 5.1.0.1 - No console/telnet/SSH access (l7_usl_macsync error)
(1) Download the zip file - PC7000v5.1.9.3a22.zip (2) Extract the image file "PC7000_M6348v5.1.9.3.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware.pdf" extracted from zip file.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.