Dell Vostro 3910/3710 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : YWW79

Importance : Critical

Version : 1.19.0, 1.19.0 Latest version Recommended version Latest and Recommended version

Release Date : 05 Feb 2024

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Vostro_3910_3710_01.19.00.exe

File size: 44.65 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 169ecb8212da5d644a9f6ddc36eb65ec

SHA1: ae8ff94bb7a0313d5cea976688a21b18a7574e53

SHA-256: a4ae4185febbeb75b77040147861ded92c114100f8b496e8b7800f0d5909e92a

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 44.64 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 1d6954056918747f2d45bc06b5a35804

SHA1: 496286ad76c72c44b4fe367a5887e164ac166a25

SHA-256: 712075db4ec94dd58c3c264249df0ad71042bb3c068cf183f6c0a845eed1df2c

Download .RCV

Fixes & Enhancements

- This release contains security updates as disclosed in the Dell Security Advisories DSA-2023-362, DSA-2023-364, DSA-2024-036, DSA-2023-449, DSA-2023-344, DSA-2023-467, and DSA-2023-191. For more information, see Dell Security Advisories and Notices.

Important Information

- Do not power off the system until the process of updating the BIOS is completed.
- Once the BIOS is upgraded, you cannot downgrade the BIOS to versions earlier than 1.0.40. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
- Intel discontinues the non-TLS network communication support for Intel Active Management Technology (AMT) and Intel Standard Manageability. For more information, see Non-TLS EOL for Intel AMT and Intel Standard Manageability.
- BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.

Compatible Systems

Vostro 3710

Vostro 3910

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.